# cat main.cf
1 # Global Postfix configuration file. This file lists only a subset
2 # of all parameters. For the syntax, and for a complete parameter
3 # list, see the postconf(5) manual page (command: "man 5 postconf").
4 #
5 # For common configuration examples, see BASIC_CONFIGURATION_README
6 # and STANDARD_CONFIGURATION_README. To find these documents, use
7 # the command "postconf html_directory readme_directory", or go to
8 # http://www.postfix.org/.
9 #
10 # For best results, change no more than 2-3 parameters at a time,
11 # and test if Postfix still works after every change.
12
13 # SOFT BOUNCE
14 #
15 # The soft_bounce parameter provides a limited safety net for
16 # testing. When soft_bounce is enabled, mail will remain queued that
17 # would otherwise bounce. This parameter disables locally-generated
18 # bounces, and prevents the SMTP server from rejecting mail permanently
19 # (by changing 5xx replies into 4xx replies). However, soft_bounce
20 # is no cure for address rewriting mistakes or mail routing mistakes.
21 #
22 #soft_bounce = no
23
24 # LOCAL PATHNAME INFORMATION
25 #
26 # The queue_directory specifies the location of the Postfix queue.
27 # This is also the root directory of Postfix daemons that run chrooted.
28 # See the files in examples/chroot-setup for setting up Postfix chroot
29 # environments on different UNIX systems.
30 #
31 queue_directory = /var/spool/postfix
32
33 # The command_directory parameter specifies the location of all
34 # postXXX commands.
35 #
36 command_directory = /usr/sbin
37
38 # The daemon_directory parameter specifies the location of all Postfix
39 # daemon programs (i.e. programs listed in the master.cf file). This
40 # directory must be owned by root.
41 #
42 daemon_directory = /usr/libexec/postfix
43
44 # The data_directory parameter specifies the location of Postfix-writable
45 # data files (caches, random numbers). This directory must be owned
46 # by the mail_owner account (see below).
47 #
48 data_directory = /var/lib/postfix
49
50 # QUEUE AND PROCESS OWNERSHIP
51 #
52 # The mail_owner parameter specifies the owner of the Postfix queue
53 # and of most Postfix daemon processes. Specify the name of a user
54 # account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
55 # AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In
56 # particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
57 # USER.
58 #
59 mail_owner = postfix
60
61 # The default_privs parameter specifies the default rights used by
62 # the local delivery agent for delivery to external file or command.
63 # These rights are used in the absence of a recipient user context.
64 # DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
65 #
66 #default_privs = nobody
67
68 # INTERNET HOST AND DOMAIN NAMES
69 #
70 # The myhostname parameter specifies the internet hostname of this
71 # mail system. The default is to use the fully-qualified domain name
72 # from gethostname(). $myhostname is used as a default value for many
73 # other configuration parameters.
74 #
75 #myhostname = host.domain.tld
76 #myhostname = virtual.domain.tld
77
78 # The mydomain parameter specifies the local internet domain name.
79 # The default is to use $myhostname minus the first component.
80 # $mydomain is used as a default value for many other configuration
81 # parameters.
82 #
83 #mydomain = domain.tld
84
85 # SENDING MAIL
86 #
87 # The myorigin parameter specifies the domain that locally-posted
88 # mail appears to come from. The default is to append $myhostname,
89 # which is fine for small sites. If you run a domain with multiple
90 # machines, you should (1) change this to $mydomain and (2) set up
91 # a domain-wide alias database that aliases each user to
92 # user@that.users.mailhost.
93 #
94 # For the sake of consistency between sender and recipient addresses,
95 # myorigin also specifies the default domain name that is appended
96 # to recipient addresses that have no @domain part.
97 #
98 #myorigin = $myhostname
99 #myorigin = $mydomain
100
101 # RECEIVING MAIL
102
103 # The inet_interfaces parameter specifies the network interface
104 # addresses that this mail system receives mail on. By default,
105 # the software claims all active interfaces on the machine. The
106 # parameter also controls delivery of mail to user@[ip.address].
107 #
108 # See also the proxy_interfaces parameter, for network addresses that
109 # are forwarded to us via a proxy or network address translator.
110 #
111 # Note: you need to stop/start Postfix when this parameter changes.
112 #
113 #inet_interfaces = all
114 #inet_interfaces = $myhostname
115 #inet_interfaces = $myhostname, localhost
116 inet_interfaces = localhost
117
118 # Enable IPv4, and IPv6 if supported
119 inet_protocols = all
120
121 # The proxy_interfaces parameter specifies the network interface
122 # addresses that this mail system receives mail on by way of a
123 # proxy or network address translation unit. This setting extends
124 # the address list specified with the inet_interfaces parameter.
125 #
126 # You must specify your proxy/NAT addresses when your system is a
127 # backup MX host for other domains, otherwise mail delivery loops
128 # will happen when the primary MX host is down.
129 #
130 #proxy_interfaces =
131 #proxy_interfaces = 1.2.3.4
132
133 # The mydestination parameter specifies the list of domains that this
134 # machine considers itself the final destination for.
135 #
136 # These domains are routed to the delivery agent specified with the
137 # local_transport parameter setting. By default, that is the UNIX
138 # compatible delivery agent that lookups all recipients in /etc/passwd
139 # and /etc/aliases or their equivalent.
140 #
141 # The default is $myhostname + localhost.$mydomain. On a mail domain
142 # gateway, you should also include $mydomain.
143 #
144 # Do not specify the names of virtual domains - those domains are
145 # specified elsewhere (see VIRTUAL_README).
146 #
147 # Do not specify the names of domains that this machine is backup MX
148 # host for. Specify those names via the relay_domains settings for
149 # the SMTP server, or use permit_mx_backup if you are lazy (see
150 # STANDARD_CONFIGURATION_README).
151 #
152 # The local machine is always the final destination for mail addressed
153 # to user@[the.net.work.address] of an interface that the mail system
154 # receives mail on (see the inet_interfaces parameter).
155 #
156 # Specify a list of host or domain names, /file/name or type:table
157 # patterns, separated by commas and/or whitespace. A /file/name
158 # pattern is replaced by its contents; a type:table is matched when
159 # a name matches a lookup key (the right-hand side is ignored).
160 # Continue long lines by starting the next line with whitespace.
161 #
162 # See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
163 #
164 mydestination = $myhostname, localhost.$mydomain, localhost
165 #mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
166 #mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain,
167 # mail.$mydomain, www.$mydomain, ftp.$mydomain
168
169 # REJECTING MAIL FOR UNKNOWN LOCAL USERS
170 #
171 # The local_recipient_maps parameter specifies optional lookup tables
172 # with all names or addresses of users that are local with respect
173 # to $mydestination, $inet_interfaces or $proxy_interfaces.
174 #
175 # If this parameter is defined, then the SMTP server will reject
176 # mail for unknown local users. This parameter is defined by default.
177 #
178 # To turn off local recipient checking in the SMTP server, specify
179 # local_recipient_maps = (i.e. empty).
180 #
181 # The default setting assumes that you use the default Postfix local
182 # delivery agent for local delivery. You need to update the
183 # local_recipient_maps setting if:
184 #
185 # - You define $mydestination domain recipients in files other than
186 # /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
187 # For example, you define $mydestination domain recipients in
188 # the $virtual_mailbox_maps files.
189 #
190 # - You redefine the local delivery agent in master.cf.
191 #
192 # - You redefine the "local_transport" setting in main.cf.
193 #
194 # - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
195 # feature of the Postfix local delivery agent (see local(8)).
196 #
197 # Details are described in the LOCAL_RECIPIENT_README file.
198 #
199 # Beware: if the Postfix SMTP server runs chrooted, you probably have
200 # to access the passwd file via the proxymap service, in order to
201 # overcome chroot restrictions. The alternative, having a copy of
202 # the system passwd file in the chroot jail is just not practical.
203 #
204 # The right-hand side of the lookup tables is conveniently ignored.
205 # In the left-hand side, specify a bare username, an @domain.tld
206 # wild-card, or specify a user@domain.tld address.
207 #
208 #local_recipient_maps = unix:passwd.byname $alias_maps
209 #local_recipient_maps = proxy:unix:passwd.byname $alias_maps
210 #local_recipient_maps =
211
212 # The unknown_local_recipient_reject_code specifies the SMTP server
213 # response code when a recipient domain matches $mydestination or
214 # ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty
215 # and the recipient address or address local-part is not found.
216 #
217 # The default setting is 550 (reject mail) but it is safer to start
218 # with 450 (try again later) until you are certain that your
219 # local_recipient_maps settings are OK.
220 #
221 unknown_local_recipient_reject_code = 550
222
223 # TRUST AND RELAY CONTROL
224
225 # The mynetworks parameter specifies the list of "trusted" SMTP
226 # clients that have more privileges than "strangers".
227 #
228 # In particular, "trusted" SMTP clients are allowed to relay mail
229 # through Postfix. See the smtpd_recipient_restrictions parameter
230 # in postconf(5).
231 #
232 # You can specify the list of "trusted" network addresses by hand
233 # or you can let Postfix do it for you (which is the default).
234 #
235 # By default (mynetworks_style = subnet), Postfix "trusts" SMTP
236 # clients in the same IP subnetworks as the local machine.
237 # On Linux, this does works correctly only with interfaces specified
238 # with the "ifconfig" command.
239 #
240 # Specify "mynetworks_style = class" when Postfix should "trust" SMTP
241 # clients in the same IP class A/B/C networks as the local machine.
242 # Don't do this with a dialup site - it would cause Postfix to "trust"
243 # your entire provider's network. Instead, specify an explicit
244 # mynetworks list by hand, as described below.
245 #
246 # Specify "mynetworks_style = host" when Postfix should "trust"
247 # only the local machine.
248 #
249 #mynetworks_style = class
250 #mynetworks_style = subnet
251 #mynetworks_style = host
252
253 # Alternatively, you can specify the mynetworks list by hand, in
254 # which case Postfix ignores the mynetworks_style setting.
255 #
256 # Specify an explicit list of network/netmask patterns, where the
257 # mask specifies the number of bits in the network part of a host
258 # address.
259 #
260 # You can also specify the absolute pathname of a pattern file instead
261 # of listing the patterns here. Specify type:table for table-based lookups
262 # (the value on the table right-hand side is not used).
263 #
264 #mynetworks = 168.100.189.0/28, 127.0.0.0/8
265 #mynetworks = $config_directory/mynetworks
266 #mynetworks = hash:/etc/postfix/network_table
267
268 # The relay_domains parameter restricts what destinations this system will
269 # relay mail to. See the smtpd_recipient_restrictions description in
270 # postconf(5) for detailed information.
271 #
272 # By default, Postfix relays mail
273 # - from "trusted" clients (IP address matches $mynetworks) to any destination,
274 # - from "untrusted" clients to destinations that match $relay_domains or
275 # subdomains thereof, except addresses with sender-specified routing.
276 # The default relay_domains value is $mydestination.
277 #
278 # In addition to the above, the Postfix SMTP server by default accepts mail
279 # that Postfix is final destination for:
280 # - destinations that match $inet_interfaces or $proxy_interfaces,
281 # - destinations that match $mydestination
282 # - destinations that match $virtual_alias_domains,
283 # - destinations that match $virtual_mailbox_domains.
284 # These destinations do not need to be listed in $relay_domains.
285 #
286 # Specify a list of hosts or domains, /file/name patterns or type:name
287 # lookup tables, separated by commas and/or whitespace. Continue
288 # long lines by starting the next line with whitespace. A file name
289 # is replaced by its contents; a type:name table is matched when a
290 # (parent) domain appears as lookup key.
291 #
292 # NOTE: Postfix will not automatically forward mail for domains that
293 # list this system as their primary or backup MX host. See the
294 # permit_mx_backup restriction description in postconf(5).
295 #
296 #relay_domains = $mydestination
297
298 # INTERNET OR INTRANET
299
300 # The relayhost parameter specifies the default host to send mail to
301 # when no entry is matched in the optional transport(5) table. When
302 # no relayhost is given, mail is routed directly to the destination.
303 #
304 # On an intranet, specify the organizational domain name. If your
305 # internal DNS uses no MX records, specify the name of the intranet
306 # gateway host instead.
307 #
308 # In the case of SMTP, specify a domain, host, host:port, [host]:port,
309 # [address] or [address]:port; the form [host] turns off MX lookups.
310 #
311 # If you're connected via UUCP, see also the default_transport parameter.
312 #
313 #relayhost = $mydomain
314 #relayhost = [gateway.my.domain]
315 #relayhost = [mailserver.isp.tld]
316 #relayhost = uucphost
317 #relayhost = [an.ip.add.ress]
318
319 # REJECTING UNKNOWN RELAY USERS
320 #
321 # The relay_recipient_maps parameter specifies optional lookup tables
322 # with all addresses in the domains that match $relay_domains.
323 #
324 # If this parameter is defined, then the SMTP server will reject
325 # mail for unknown relay users. This feature is off by default.
326 #
327 # The right-hand side of the lookup tables is conveniently ignored.
328 # In the left-hand side, specify an @domain.tld wild-card, or specify
329 # a user@domain.tld address.
330 #
331 #relay_recipient_maps = hash:/etc/postfix/relay_recipients
332
333 # INPUT RATE CONTROL
334 #
335 # The in_flow_delay configuration parameter implements mail input
336 # flow control. This feature is turned on by default, although it
337 # still needs further development (it's disabled on SCO UNIX due
338 # to an SCO bug).
339 #
340 # A Postfix process will pause for $in_flow_delay seconds before
341 # accepting a new message, when the message arrival rate exceeds the
342 # message delivery rate. With the default 100 SMTP server process
343 # limit, this limits the mail inflow to 100 messages a second more
344 # than the number of messages delivered per second.
345 #
346 # Specify 0 to disable the feature. Valid delays are 0..10.
347 #
348 #in_flow_delay = 1s
349
350 # ADDRESS REWRITING
351 #
352 # The ADDRESS_REWRITING_README document gives information about
353 # address masquerading or other forms of address rewriting including
354 # username->Firstname.Lastname mapping.
355
356 # ADDRESS REDIRECTION (VIRTUAL DOMAIN)
357 #
358 # The VIRTUAL_README document gives information about the many forms
359 # of domain hosting that Postfix supports.
360
361 # "USER HAS MOVED" BOUNCE MESSAGES
362 #
363 # See the discussion in the ADDRESS_REWRITING_README document.
364
365 # TRANSPORT MAP
366 #
367 # See the discussion in the ADDRESS_REWRITING_README document.
368
369 # ALIAS DATABASE
370 #
371 # The alias_maps parameter specifies the list of alias databases used
372 # by the local delivery agent. The default list is system dependent.
373 #
374 # On systems with NIS, the default is to search the local alias
375 # database, then the NIS alias database. See aliases(5) for syntax
376 # details.
377 #
378 # If you change the alias database, run "postalias /etc/aliases" (or
379 # wherever your system stores the mail alias file), or simply run
380 # "newaliases" to build the necessary DBM or DB file.
381 #
382 # It will take a minute or so before changes become visible. Use
383 # "postfix reload" to eliminate the delay.
384 #
385 #alias_maps = dbm:/etc/aliases
386 alias_maps = hash:/etc/aliases
387 #alias_maps = hash:/etc/aliases, nis:mail.aliases
388 #alias_maps = netinfo:/aliases
389
390 # The alias_database parameter specifies the alias database(s) that
391 # are built with "newaliases" or "sendmail -bi". This is a separate
392 # configuration parameter, because alias_maps (see above) may specify
393 # tables that are not necessarily all under control by Postfix.
394 #
395 #alias_database = dbm:/etc/aliases
396 #alias_database = dbm:/etc/mail/aliases
397 alias_database = hash:/etc/aliases
398 #alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases
399
400 # ADDRESS EXTENSIONS (e.g., user+foo)
401 #
402 # The recipient_delimiter parameter specifies the separator between
403 # user names and address extensions (user+foo). See canonical(5),
404 # local(8), relocated(5) and virtual(5) for the effects this has on
405 # aliases, canonical, virtual, relocated and .forward file lookups.
406 # Basically, the software tries user+foo and .forward+foo before
407 # trying user and .forward.
408 #
409 #recipient_delimiter = +
410
411 # DELIVERY TO MAILBOX
412 #
413 # The home_mailbox parameter specifies the optional pathname of a
414 # mailbox file relative to a user's home directory. The default
415 # mailbox file is /var/spool/mail/user or /var/mail/user. Specify
416 # "Maildir/" for qmail-style delivery (the / is required).
417 #
418 #home_mailbox = Mailbox
419 #home_mailbox = Maildir/
420
421 # The mail_spool_directory parameter specifies the directory where
422 # UNIX-style mailboxes are kept. The default setting depends on the
423 # system type.
424 #
425 #mail_spool_directory = /var/mail
426 #mail_spool_directory = /var/spool/mail
427
428 # The mailbox_command parameter specifies the optional external
429 # command to use instead of mailbox delivery. The command is run as
430 # the recipient with proper HOME, SHELL and LOGNAME environment settings.
431 # Exception: delivery for root is done as $default_user.
432 #
433 # Other environment variables of interest: USER (recipient username),
434 # EXTENSION (address extension), DOMAIN (domain part of address),
435 # and LOCAL (the address localpart).
436 #
437 # Unlike other Postfix configuration parameters, the mailbox_command
438 # parameter is not subjected to $parameter substitutions. This is to
439 # make it easier to specify shell syntax (see example below).
440 #
441 # Avoid shell meta characters because they will force Postfix to run
442 # an expensive shell process. Procmail alone is expensive enough.
443 #
444 # IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
445 # ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
446 #
447 #mailbox_command = /some/where/procmail
448 #mailbox_command = /some/where/procmail -a "$EXTENSION"
449
450 # The mailbox_transport specifies the optional transport in master.cf
451 # to use after processing aliases and .forward files. This parameter
452 # has precedence over the mailbox_command, fallback_transport and
453 # luser_relay parameters.
454 #
455 # Specify a string of the form transport:nexthop, where transport is
456 # the name of a mail delivery transport defined in master.cf. The
457 # :nexthop part is optional. For more details see the sample transport
458 # configuration file.
459 #
460 # NOTE: if you use this feature for accounts not in the UNIX password
461 # file, then you must update the "local_recipient_maps" setting in
462 # the main.cf file, otherwise the SMTP server will reject mail for
463 # non-UNIX accounts with "User unknown in local recipient table".
464 #
465 #mailbox_transport = lmtp:unix:/var/lib/imap/socket/lmtp
466
467 # If using the cyrus-imapd IMAP server deliver local mail to the IMAP
468 # server using LMTP (Local Mail Transport Protocol), this is prefered
469 # over the older cyrus deliver program by setting the
470 # mailbox_transport as below:
471 #
472 # mailbox_transport = lmtp:unix:/var/lib/imap/socket/lmtp
473 #
474 # The efficiency of LMTP delivery for cyrus-imapd can be enhanced via
475 # these settings.
476 #
477 # local_destination_recipient_limit = 300
478 # local_destination_concurrency_limit = 5
479 #
480 # Of course you should adjust these settings as appropriate for the
481 # capacity of the hardware you are using. The recipient limit setting
482 # can be used to take advantage of the single instance message store
483 # capability of Cyrus. The concurrency limit can be used to control
484 # how many simultaneous LMTP sessions will be permitted to the Cyrus
485 # message store.
486 #
487 # To use the old cyrus deliver program you have to set:
488 #mailbox_transport = cyrus
489
490 # The fallback_transport specifies the optional transport in master.cf
491 # to use for recipients that are not found in the UNIX passwd database.
492 # This parameter has precedence over the luser_relay parameter.
493 #
494 # Specify a string of the form transport:nexthop, where transport is
495 # the name of a mail delivery transport defined in master.cf. The
496 # :nexthop part is optional. For more details see the sample transport
497 # configuration file.
498 #
499 # NOTE: if you use this feature for accounts not in the UNIX password
500 # file, then you must update the "local_recipient_maps" setting in
501 # the main.cf file, otherwise the SMTP server will reject mail for
502 # non-UNIX accounts with "User unknown in local recipient table".
503 #
504 #fallback_transport = lmtp:unix:/var/lib/imap/socket/lmtp
505 #fallback_transport =
506
507 # The luser_relay parameter specifies an optional destination address
508 # for unknown recipients. By default, mail for unknown@$mydestination,
509 # unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned
510 # as undeliverable.
511 #
512 # The following expansions are done on luser_relay: $user (recipient
513 # username), $shell (recipient shell), $home (recipient home directory),
514 # $recipient (full recipient address), $extension (recipient address
515 # extension), $domain (recipient domain), $local (entire recipient
516 # localpart), $recipient_delimiter. Specify ${name?value} or
517 # ${name:value} to expand value only when $name does (does not) exist.
518 #
519 # luser_relay works only for the default Postfix local delivery agent.
520 #
521 # NOTE: if you use this feature for accounts not in the UNIX password
522 # file, then you must specify "local_recipient_maps =" (i.e. empty) in
523 # the main.cf file, otherwise the SMTP server will reject mail for
524 # non-UNIX accounts with "User unknown in local recipient table".
525 #
526 #luser_relay = $user@other.host
527 #luser_relay = $local@other.host
528 #luser_relay = admin+$local
529
530 # JUNK MAIL CONTROLS
531 #
532 # The controls listed here are only a very small subset. The file
533 # SMTPD_ACCESS_README provides an overview.
534
535 # The header_checks parameter specifies an optional table with patterns
536 # that each logical message header is matched against, including
537 # headers that span multiple physical lines.
538 #
539 # By default, these patterns also apply to MIME headers and to the
540 # headers of attached messages. With older Postfix versions, MIME and
541 # attached message headers were treated as body text.
542 #
543 # For details, see "man header_checks".
544 #
545 #header_checks = regexp:/etc/postfix/header_checks
546
547 # FAST ETRN SERVICE
548 #
549 # Postfix maintains per-destination logfiles with information about
550 # deferred mail, so that mail can be flushed quickly with the SMTP
551 # "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
552 # See the ETRN_README document for a detailed description.
553 #
554 # The fast_flush_domains parameter controls what destinations are
555 # eligible for this service. By default, they are all domains that
556 # this server is willing to relay mail to.
557 #
558 #fast_flush_domains = $relay_domains
559
560 # SHOW SOFTWARE VERSION OR NOT
561 #
562 # The smtpd_banner parameter specifies the text that follows the 220
563 # code in the SMTP server's greeting banner. Some people like to see
564 # the mail version advertised. By default, Postfix shows no version.
565 #
566 # You MUST specify $myhostname at the start of the text. That is an
567 # RFC requirement. Postfix itself does not care.
568 #
569 #smtpd_banner = $myhostname ESMTP $mail_name
570 #smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)
571
572 # PARALLEL DELIVERY TO THE SAME DESTINATION
573 #
574 # How many parallel deliveries to the same user or domain? With local
575 # delivery, it does not make sense to do massively parallel delivery
576 # to the same user, because mailbox updates must happen sequentially,
577 # and expensive pipelines in .forward files can cause disasters when
578 # too many are run at the same time. With SMTP deliveries, 10
579 # simultaneous connections to the same domain could be sufficient to
580 # raise eyebrows.
581 #
582 # Each message delivery transport has its XXX_destination_concurrency_limit
583 # parameter. The default is $default_destination_concurrency_limit for
584 # most delivery transports. For the local delivery agent the default is 2.
585
586 #local_destination_concurrency_limit = 2
587 #default_destination_concurrency_limit = 20
588
589 # DEBUGGING CONTROL
590 #
591 # The debug_peer_level parameter specifies the increment in verbose
592 # logging level when an SMTP client or server host name or address
593 # matches a pattern in the debug_peer_list parameter.
594 #
595 debug_peer_level = 2
596
597 # The debug_peer_list parameter specifies an optional list of domain
598 # or network patterns, /file/name patterns or type:name tables. When
599 # an SMTP client or server host name or address matches a pattern,
600 # increase the verbose logging level by the amount specified in the
601 # debug_peer_level parameter.
602 #
603 #debug_peer_list = 127.0.0.1
604 #debug_peer_list = some.domain
605
606 # The debugger_command specifies the external command that is executed
607 # when a Postfix daemon program is run with the -D option.
608 #
609 # Use "command .. & sleep 5" so that the debugger can attach before
610 # the process marches on. If you use an X-based debugger, be sure to
611 # set up your XAUTHORITY environment variable before starting Postfix.
612 #
613 debugger_command =
614 PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
615 ddd $daemon_directory/$process_name $process_id & sleep 5
616
617 # If you can't use X, use this to capture the call stack when a
618 # daemon crashes. The result is in a file in the configuration
619 # directory, and is named after the process name and the process ID.
620 #
621 # debugger_command =
622 # PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont;
623 # echo where) | gdb $daemon_directory/$process_name $process_id 2>&1
624 # >$config_directory/$process_name.$process_id.log & sleep 5
625 #
626 # Another possibility is to run gdb under a detached screen session.
627 # To attach to the screen sesssion, su root and run "screen -r
628 # <id_string>" where <id_string> uniquely matches one of the detached
629 # sessions (from "screen -list").
630 #
631 # debugger_command =
632 # PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen
633 # -dmS $process_name gdb $daemon_directory/$process_name
634 # $process_id & sleep 1
635
636 # INSTALL-TIME CONFIGURATION INFORMATION
637 #
638 # The following parameters are used when installing a new Postfix version.
639 #
640 # sendmail_path: The full pathname of the Postfix sendmail command.
641 # This is the Sendmail-compatible mail posting interface.
642 #
643 sendmail_path = /usr/sbin/sendmail.postfix
644
645 # newaliases_path: The full pathname of the Postfix newaliases command.
646 # This is the Sendmail-compatible command to build alias databases.
647 #
648 newaliases_path = /usr/bin/newaliases.postfix
649
650 # mailq_path: The full pathname of the Postfix mailq command. This
651 # is the Sendmail-compatible mail queue listing command.
652 #
653 mailq_path = /usr/bin/mailq.postfix
654
655 # setgid_group: The group for mail submission and queue management
656 # commands. This must be a group name with a numerical group ID that
657 # is not shared with other accounts, not even with the Postfix account.
658 #
659 setgid_group = postdrop
660
661 # html_directory: The location of the Postfix HTML documentation.
662 #
663 html_directory = no
664
665 # manpage_directory: The location of the Postfix on-line manual pages.
666 #
667 manpage_directory = /usr/share/man
668
669 # sample_directory: The location of the Postfix sample configuration files.
670 # This parameter is obsolete as of Postfix 2.1.
671 #
672 sample_directory = /usr/share/doc/postfix-2.6.6/samples
673
674 # readme_directory: The location of the Postfix README files.
675 #
676 readme_directory = /usr/share/doc/postfix-2.6.6/README_FILES