DECLARE @return_value int,
@TotalCount int,
@TotalPageCount int
EXEC @return_value = [dbo].[UP_GetRecordByPageOrder]
@tblName = N'dbo.task AS ts LEFT JOIN dbo.task_scinfo AS sc ON ts.id = sc.sc_rwid',
@fldName = N'ts.id,ts.class_name,ts.task_name,ts.file_url,sc.id AS scid',
@strWhere = N'ts.islock = 0',
@OrderfldName = N'ts.id asc',
@PageSize = 10,
@PageIndex = 0,
@TotalCount = @TotalCount OUTPUT,
@TotalPageCount = @TotalPageCount OUTPUT
SELECT @TotalCount as N'@TotalCount',
@TotalPageCount as N'@TotalPageCount'
SELECT 'Return Value' = @return_value
GO
UP_GetRecordByPageOrder
CREATE PROC [dbo].[UP_GetRecordByPageOrder]
/*
nzperfect [no_mIss] 高效通用分页存储过程(双向检索) 2009.4.22
敬告：适用于单一主键或存在唯一值列的表或视图
ps:Sql语句为8000字节,调用时请注意传入参数及sql总长度不要超过指定范围
*/
@tblName VARCHAR(255), --表名
@fldName VARCHAR(255), --显示列名，如果是全部字段则为*
@strWhere VARCHAR(1000), --查询条件 不含'where'字符，如id>10 and len(userid)>9
@OrderfldName VARCHAR(255), --排序(多列排序情况) 不含'order by'字符，如id asc,userid desc，必须指定asc或desc
--注意当@SortType=3时生效，记住一定要在最后加上主键，否则会让你比较郁闷
@PageSize INT =10, --每页输出的记录数
@PageIndex INT =1, --当前页数
@IsRecount bit =0,
@RecorderCount INT =0, --记录总数 1:会返回总记录
@TotalCount INT =0 OUTPUT, --记返回总记录
@TotalPageCount INT =0 OUTPUT --返回总页数
AS
----------------参数验证-----------------
SET NOCOUNT ON
--总页数
IF ISNULL(@TotalCount,'') = '' SET @TotalCount = 0
--排序方式
SET @OrderfldName = RTRIM(LTRIM(@OrderfldName))
--字段列表
--SET @fldName = REPLACE(RTRIM(LTRIM(@fldName)),' ','')
--排序表达式整理
WHILE CHARINDEX(', ',@OrderfldName) > 0 OR CHARINDEX(' ,',@OrderfldName) > 0
BEGIN
SET @OrderfldName = REPLACE(@OrderfldName,', ',',')
SET @OrderfldName = REPLACE(@OrderfldName,' ,',',')
END
IF ISNULL(@tblName,'') = '' OR ISNULL(@fldName,'') = ''
OR @RecorderCount < 0 OR @PageSize < 0 OR @PageIndex < 0
BEGIN
PRINT('ERR_00')
RETURN
END
-------------------处理排序表达式----------------
BEGIN
IF (UPPER(RIGHT(@OrderfldName,4))!=' ASC' AND UPPER(RIGHT(@OrderfldName,5))!=' DESC')
BEGIN PRINT('ERR_02') RETURN END
END
DECLARE @new_where1 VARCHAR(1000)
DECLARE @new_where2 VARCHAR(1000)
DECLARE @new_order1 VARCHAR(1000)
DECLARE @new_order2 VARCHAR(1000)
DECLARE @new_order3 VARCHAR(1000)
DECLARE @temptable VARCHAR(1000)
DECLARE @Sql VARCHAR(8000)
DECLARE @SqlCount NVARCHAR(4000)
SET @temptable=@tblName
IF ISNULL(@strWhere,'') = ''
BEGIN
SET @new_where1 = ' '
SET @new_where2 = ' WHERE '
END
ELSE
BEGIN
SET @new_where1 = ' WHERE ' + @strWhere
SET @new_where2 = ' WHERE ' + @strWhere + ' AND '
END
BEGIN
SET @new_order1 = ' ORDER BY ' + @OrderfldName
END
BEGIN
SET @new_order1 = ' ORDER BY ' + @OrderfldName
SET @new_order2 = @OrderfldName + ','
SET @new_order2 = REPLACE(REPLACE(@new_order2,'ASC,','{ASC},'),'DESC,','{DESC},')
SET @new_order2 = REPLACE(REPLACE(@new_order2,'{ASC},','DESC,'),'{DESC},','ASC,')
SET @new_order2 = ' ORDER BY ' + SUBSTRING(@new_order2,1,LEN(@new_order2)-1)
IF @fldName <> '*'
BEGIN
SET @new_order3 = REPLACE(REPLACE(@OrderfldName + ',','ASC,',','),'DESC,',',')
SET @fldName = ',' + @fldName
WHILE CHARINDEX(',',@new_order3)>0
BEGIN
IF CHARINDEX(SUBSTRING(','+@new_order3,1,CHARINDEX(',',@new_order3)),','+@fldName+',')>0
BEGIN
SET @fldName =
@fldName + ',' + SUBSTRING(@new_order3,1,CHARINDEX(',',@new_order3))
END
SET @new_order3 =
SUBSTRING(@new_order3,CHARINDEX(',',@new_order3)+1,LEN(@new_order3))
END
SET @fldName = SUBSTRING(@fldName,2,LEN(@fldName))
END
END
------根据所要取的记录数@RecorderCount取出总记录数及总页数
SET @SqlCount = 'SELECT @TotalCount=COUNT(1),@TotalPageCount=CEILING((COUNT(1)+0.0)/'
+ CAST(@PageSize AS VARCHAR)+') FROM ' + @temptable + @new_where1
IF @RecorderCount = 0
BEGIN
EXEC SP_EXECUTESQL @SqlCount,N'@TotalCount INT OUTPUT,@TotalPageCount INT OUTPUT',
@TotalCount OUTPUT,@TotalPageCount OUTPUT
END
ELSE
BEGIN
SELECT @TotalCount = @RecorderCount,@TotalPageCount=CEILING((@TotalCount+0.0)/@PageSize)
set @SqlCount='drop table temp select TOP('+CAST(@TotalCount As varchar)+') * into temp from '+@temptable+ @new_where1 + @new_order1
exec sp_executesql @SqlCount
set @temptable='temp'
END
--------------------------取数据------------------------
IF @PageIndex = 1 OR @PageIndex >= CEILING((@TotalCount+0.0)/@PageSize) OR @PageIndex =0
BEGIN
IF @PageIndex = 1 OR @PageIndex =0 --返回第一页数据
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @fldName + ' FROM '
+ @temptable + @new_where1 + @new_order1
END
IF @PageIndex >= CEILING((@TotalCount+0.0)/@PageSize) --返回最后一页数据
BEGIN
SET @PageIndex = CEILING((@TotalCount+0.0)/@PageSize)
SET @Sql = 'SELECT TOP ' +STR(@TotalCount-@PageSize*(@TotalPageCount-1)) + ' * FROM ('
+ 'SELECT TOP ' + STR(ABS(@PageSize*@PageIndex-@TotalCount-@PageSize))
+ ' ' + @fldName + ' FROM '
+ @temptable + @new_where1 + @new_order2 + ' ) AS TMP '
+ @new_order1
END
END
ELSE
BEGIN
---------------------------输出数据-------------------------------
IF @PageIndex <= CEILING((@TotalCount+0.0)/@PageSize)/2 --正向检索
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' * FROM ( '
+ 'SELECT TOP ' + STR(@PageSize) + ' * FROM ( '
+ ' SELECT TOP ' + STR(@PageSize*@PageIndex) + ' ' + @fldName
+ ' FROM ' + @temptable + @new_where1 + @new_order1 + ' ) AS TMP '
+ @new_order2 + ' ) AS TMP ' + @new_order1
END
ELSE --反向检索
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' * FROM ( '
+ 'SELECT TOP ' + STR(@PageSize) + ' * FROM ( '
+ ' SELECT TOP ' + STR(@TotalCount-@PageSize *@PageIndex+@PageSize) + ' ' + @fldName
+ ' FROM ' + @temptable + @new_where1 + @new_order2 + ' ) AS TMP '
+ @new_order1 + ' ) AS TMP ' + @new_order1
END
END
EXEC(@Sql)