[转]Windows Mobile，DMProcessConfigXML 使用实例

这些方法主要是针对函数DMProcessConfigXML里面的第一个参数来的，函数的具体使用方法参见MSDN。

MSDN没有对第一个参数做太多解释，下面提供一些使用实例：

1, 创建cmnet连接

LPCWSTR strFavoriteXml =
L"<wap-provisioningdoc>"
L"<characteristic type=\"CM_GPRSEntries\">"
    L"<characteristic type=\"Internet Connect\">"
      L"<parm name=\"DestId\" value=\"{436EF144-B4FB-4863-A041-8F905A62C572}\" />"
      L"<characteristic type=\"DevSpecificCellular\">"
        L"<parm name=\"GPRSInfoAccessPointName\" value=\"cmnet\" />"
      L"</characteristic>"
    L"</characteristic>"
L"</characteristic>"
L"</wap-provisioningdoc>"; //DestID是自己定义的GUID，当然，也有已经定义好的GUID可以直接用

LPWSTR pszwXMLout = NULL;
HRESULT hr = DMProcessConfigXML(strFavoriteXml, CFGFLAG_PROCESS, &pszwXMLout);
if ( pszwXMLout )
{
delete [] pszwXMLout;
pszwXMLout = NULL;
}

--------------------------------------------------------------------------------
2，创建CMWAP连接

CString strFavoriteXml =
L"<wap-provisioningdoc>"
L"<characteristic type=\"CM_Networks\">"
    L"<characteristic type=\"Test_GPRS\">"
      L"<parm name=\"DestId\" value=\"{D1D06580-C364-55ec-9421-6ACF34129C58}\" />"
    L"</characteristic>"
L"</characteristic>"
L"<characteristic type=\"CM_GPRSEntries\">"
    L"<characteristic type=\"Test_GPRS\">"
      L"<parm name=\"DestId\" value=\"{D1D06580-C364-55ec-9421-6ACF34129C58}\" />"
      L"<characteristic type=\"DevSpecificCellular\">"
        L"<parm name=\"BearerInfoValid\" value=\"1\" />"
        L"<parm name=\"GPRSInfoValid\" value=\"1\" />"
        L"<parm name=\"GPRSInfoProtocolType\" value=\"2\" />"
        L"<parm name=\"GPRSInfoL2ProtocolType\" value=\"PPP\" />"
        L"<parm name=\"GPRSInfoAccessPointName\" value=\"cmwap\" />"
        L"<parm name=\"GPRSInfoAddress\" value=\"\" />"
        L"<parm name=\"GPRSInfoDataCompression\" value=\"1\" />"
        L"<parm name=\"GPRSInfoHeaderCompression\" value=\"1\" />"
        L"<parm name=\"GPRSInfoParameters\" value=\"\" />"
      L"</characteristic>"
    L"</characteristic>"
L"</characteristic>"
L"<characteristic type=\"CM_ProxyEntries\">"
    L"<characteristic type=\"WAP\">"
      L"<parm name=\"SrcId\" value=\"{D1D06580-C364-55ec-9421-6ACF34129C58}\" />"
      L"<parm name=\"DestId\" value=\"{436EF144-B4FB-4863-A041-8F905A62C572}\" />"
      L"<parm name=\"Proxy\" value=\"10.0.0.172:80\" />"
      L"<parm name=\"Enable\" value=\"1\" />"
      L"<parm name=\"Type\" value=\"1\" />"
    L"</characteristic>"
L"</characteristic>"
L"</wap-provisioningdoc>";

LPWSTR pszwXMLout = NULL;
HRESULT hr = DMProcessConfigXML(strFavoriteXml, CFGFLAG_PROCESS, &pszwXMLout);

if ( pszwXMLout )
{
delete [] pszwXMLout;
pszwXMLout = NULL;
}

--------------------------------------------------------------------------------

3，卸载应用程序

LPCTSTR szFormat =
L"<wap-provisioningdoc>"
L"<characteristic type="UnInstall">"
    L"<characteristic type="[AppName]">"
      L"<parm name="uninstall" value="1"/>"
    L"</characteristic>"
L"</characteristic>"
L"</wap-provisioningdoc>"
//[AppName] = 注册表中对应的该软件的名称一般是：生成cab包使用的inf中的provider和appname的组合
//如：provider = aaa appname = bbb <characteristic type="aaa bbb"> 然后用DMProcessConfigXML来处理

--------------------------------------------------------------------------------

4，关闭硬件按钮铃声

LPCTSTR szFormat =
L"<wap-provisioningdoc>"
L"<characteristic type="Sounds">"
    L"<characteristic type="ControlPanel\Sounds\KeyPress">"
      L"<parm name="Mode" value="1"/> "
    L"</characteristic>"
L"</characteristic>"
L"</wap-provisioningdoc>"
//使用DMProcessConfigXML()函数通过配置管理器发送上面的XML配置数据。

--------------------------------------------------------------------------------

5,创建一封新的Email

LPCWSTR strFavoriteXml =
L"<wap-provisioningdoc>"
L"<characteristic type="EMAIL2">"
    L"<characteristic type="[GUID]">"
      L"<parm name="SERVICENAME" value="[MailServiceName]"/>"
      L"<parm name="SERVICETYPE" value="POP3"/>"
      L"<parm name="INSERVER" value="[popserver]"/>"
      L"<parm name="OUTSERVER" value="[smtpserver]"/>"
      L"<parm name="AUTHNAME" value="[alias]"/>"
      L"<parm name="AUTHSECRET" value="[password]"/>"
      L"<parm name="DOMAIN" value="[domain]"/>"
      L"<parm name="REPLYADDR" value="[emailAddress]"/>"
    L"</characteristic>"
L"</characteristic>"
L"</wap-provisioningdoc>"
//[]中的参数都是自定义的

--------------------------------------------------------------------------------

6，创建Wi-Fi连接

//This XML will add or overwrite a Wi-Fi access point connection with SSID COWO, no encryption, open authentication.
//This connection is regarded as an internet connection.

LPCWSTR in = \
L"<wap-provisioningdoc>"
L" <characteristic type=\"Wi-Fi\"> "
L" <characteristic type=\"access-point\"> "
L"   <characteristic type=\"COWO\"> "
L"     <parm name=\"DestId\" value=\"{436EF144-B4FB-4863-A041-8F905A62C572}\"/>"
L"     <parm name=\"AdHoc\" value=\"0\"/>"
L"     <parm name=\"Authentication\" value=\"0\"/>"
L"     <parm name=\"Encryption\" value=\"1\"/>"
L"     <parm name=\"KeyProvided\" value=\"0\"/>"
L"     <parm name=\"NetworkKey\" value=\"\"/>"
L"     <parm name=\"KeyIndex\" value=\"1\"/>"
L"     <parm name=\"Use8021x\" value=\"0\"/>"
L"     <parm name=\"EAPType\" value=\"25\"/>"
L"   </characteristic>"
L" </characteristic>"
L" </characteristic>"
L"</wap-provisioningdoc>";

--------------------------------------------------------------------------------

7，枚举Wi-Fi连接点

//There are some M$ examples about recursive query of all WiFi connections.
//Here's an example on how to query a specific connection.

LPCWSTR in =
L"<wap-provisioningdoc>"
L" <characteristic type=\"Wi-Fi\"> "
L" <characteristic type=\"access-point\"> "
L" <characteristic-query type=\"COWO\" /> "
L" </characteristic>"
L" </characteristic>"
L"</wap-provisioningdoc>";

--------------------------------------------------------------------------------

3,获取某个连接的接入点

LPCTSTR szFormat =
L"<wap-provisioningdoc>"
L"<characteristic type=\"CM_GPRSEntries\">"
    L"<characteristic type=\"%s\">"
      L"<characteristic type=\"DevSpecificCellular\">"
        L"<parm-query name=\"GPRSInfoAccessPointName\"/>"
      L"</characteristic>"
    L"</characteristic>"
L"</characteristic>"
L"</wap-provisioningdoc>";
//%s为 "移动梦网(GPRS)" "GPRS连接互联网" 等，
//可以用ConnMgrQueryDetailedStatus枚举，CONNMGR_CONNECTION_DETAILED_STATUS的szDescription

from: http://blog.csdn.net/lianghuating/archive/2009/03/25/4022486.aspx