1、查看
iptables -nvL –line-number
-L 查看当前表的所有规则,默认查看的是filter表,如果要查看NAT表,可以加上-t NAT参数
-n 不对ip地址进行反查,加上这个参数显示速度会快很多
-v 输出详细信息,包含通过该规则的数据包数量,总字节数及相应的网络接口
–line-number 显示规则的序列号,这个参数在删除或修改规则时会用到
2、添加
添加规则有两个参数:-A和-I。其中-A是添加到规则的末尾;-I可以插入到指定位置,没有指定位置的话默认插入到规则的首部。
当前规则:
[root@test ~]# iptables -nL --line-number
Chain INPUT (policy ACCEPT)
num target prot opt source destination
1 DROP all -- 192.168.1.1 0.0.0.0/0
2 DROP all -- 192.168.1.2 0.0.0.0/0
3 DROP all -- 192.168.1.4 0.0.0.0/0
添加一条规则到尾部:
[root@test ~]# iptables -A INPUT -s 192.168.1.5 -j DROP
再插入一条规则到第三行,将行数直接写到规则链的后面:
[root@test ~]# iptables -I INPUT 3 -s 192.168.1.3 -j DROP
查看:
[root@test ~]# iptables -nL --line-number
Chain INPUT (policy ACCEPT)
num target prot opt source destination
1 DROP all -- 192.168.1.1 0.0.0.0/0
2 DROP all -- 192.168.1.2 0.0.0.0/0
3 DROP all -- 192.168.1.3 0.0.0.0/0
4 DROP all -- 192.168.1.4 0.0.0.0/0
5 DROP all -- 192.168.1.5 0.0.0.0/0
可以看到192.168.1.3插入到第三行,而原来的第三行192.168.1.4变成了第四行。
3、删除
删除用-D参数
删除之前添加的规则(iptables -A INPUT -s 192.168.1.5 -j DROP):
[root@test ~]# iptables -D INPUT -s 192.168.1.5 -j DROP
有时候要删除的规则太长,删除时要写一大串,既浪费时间又容易写错,这时我们可以先使用–line-number找出该条规则的行号,再通过行号删除规则。
[root@test ~]# iptables -nv --line-number
iptables v1.4.7: no command specified
Try `iptables -h' or 'iptables --help' for more information.
[root@test ~]# iptables -nL --line-number
Chain INPUT (policy ACCEPT)
num target prot opt source destination
1 DROP all -- 192.168.1.1 0.0.0.0/0
2 DROP all -- 192.168.1.2 0.0.0.0/0
3 DROP all -- 192.168.1.3 0.0.0.0/0
删除第二行规则
[root@test ~]# iptables -D INPUT 2
4、修改
修改使用-R参数
先看下当前规则:
[root@test ~]# iptables -nL --line-number
Chain INPUT (policy ACCEPT)
num target prot opt source destination
1 DROP all -- 192.168.1.1 0.0.0.0/0
2 DROP all -- 192.168.1.2 0.0.0.0/0
3 DROP all -- 192.168.1.5 0.0.0.0/0
将第三条规则改为ACCEPT:
[root@test ~]# iptables -R INPUT 3 -j ACCEPT
再查看下:
[root@test ~]# iptables -nL --line-number
Chain INPUT (policy ACCEPT)
num target prot opt source destination
1 DROP all -- 192.168.1.1 0.0.0.0/0
2 DROP all -- 192.168.1.2 0.0.0.0/0
3 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0
第三条规则的target已改为ACCEPT。
-----------------------------------------------------------
# Example of overriding settings on a per-user basis
#Match User anoncvs
# X11Forwarding no
# AllowTcpForwarding no
# PermitTTY no
# ForceCommand cvs server
[root@localhost ssh]# cat /etc/sysconfig/iptables
*filter
:INPUT DROP [1:576]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [593:64823]
-A INPUT -p tcp -m tcp --dport 22 -j ACCEPT
-A INPUT -p tcp -m tcp --dport 65358 -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT
-A INPUT -s 172.16.1.0/24 -j ACCEPT
-A INPUT -s 172.17.0.0/16 -j ACCEPT
-A INPUT -p tcp -m tcp --dport 443 -j ACCEPT
-A INPUT -p tcp -m tcp --dport 3306 -j ACCEPT
-A INPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT
-A INPUT -p tcp -m tcp --dport 53 -j ACCEPT
-A INPUT -p udp -m udp --dport 53 -j ACCEPT
COMMIT