实验任务一：basic nat配置
1.搭建实验环境
2.配置ip地址
3.检查连通性
4.配置basic nat
[RTA]acl basic 2000
[RTA-acl-ipv4-basic-2000]rule 0 permit source 10.0.0.0 0.0.0.255
[RTA]nat address-group 1
//配置nat地址池1，地址池中的用于转换的地址198.76.28.11-198.76.28.20
[RTA-address-group-1]address 198.76.28.11 198.76.28.20
[RTA]interface GigabitEthernet 0/1
[RTA-GigabitEthernet0/1]nat outbound 2000 address-group 1 no-pat
5．ClientA clientB ping server,ping通
6.检查NAT表项
[RTA]display nat session
Slot 0:
Initiator:
Source IP/port: 10.0.0.1/170//私网的原地址和端口
Destination IP/port: 198.76.29.4/2048//公网地址和端口
DS-Lite tunnel peer: -
VPN instance/VLAN ID/VLL ID: -/-/-
Protocol: ICMP(1)
Inbound interface: GigabitEthernet0/0
Initiator:
Source IP/port: 10.0.0.2/171
Destination IP/port: 198.76.29.4/2048
DS-Lite tunnel peer: -
VPN instance/VLAN ID/VLL ID: -/-/-
Protocol: ICMP(1)
Inbound interface: GigabitEthernet0/0
Total sessions found: 2
[RTA]display nat no-pat
Slot 0:
Local IP: 10.0.0.1
Global IP: 198.76.28.15//显示私网转换后的公网地址
Reversible: N
Type : Outbound
Local IP: 10.0.0.2
Global IP: 198.76.28.16
Reversible: N
Type : Outbound
Total entries found: 2
几分钟过后，发现表项全部消失了。
NAT表项具有一定的老化时间，一旦超过老化时间，NAT会删除表项
[]Display session aging-time state//可以查看路由器会话的默认老化时间
NAT调试信息
[]Terminal monitor
[]Terminal debugging
[]Debugging nat packet
实验任务二：NAPT配置
- 搭建实验环境，和任务一一样，
- 检查连通性
- 配置NAPT
[RTA]nat address-group 1
[RTA-address-group-1]address 198.76.28.11 198.76.28.11
[RTA-GigabitEthernet0/1]nat outbound 2000 address-group 1 - 查看NAT表项
[H3C]display nat session verbose
Slot 0:
Initiator:
Source IP/port: 10.0.0.2/182
Destination IP/port: 198.76.29.4/2048
DS-Lite tunnel peer: -
VPN instance/VLAN ID/VLL ID: -/-/-
Protocol: ICMP(1)
Inbound interface: GigabitEthernet0/0
Responder:
Source IP/port: 198.76.29.4/6
Destination IP/port: 198.76.28.11/0
DS-Lite tunnel peer: -
VPN instance/VLAN ID/VLL ID: -/-/-
Protocol: ICMP(1)
Inbound interface: GigabitEthernet0/1
State: ICMP_REPLY
Application: OTHER
Start time: 2018-04-23 21:43:50 TTL: 27s
Initiator->Responder: 0 packets 0 bytes
Responder->Initiator: 0 packets 0 bytes
Initiator:
Source IP/port: 10.0.0.1/181
Destination IP/port: 198.76.29.4/2048
DS-Lite tunnel peer: -
VPN instance/VLAN ID/VLL ID: -/-/-
Protocol: ICMP(1)
Inbound interface: GigabitEthernet0/0
Responder:
Source IP/port: 198.76.29.4/5
Destination IP/port: 198.76.28.11/0
DS-Lite tunnel peer: -
VPN instance/VLAN ID/VLL ID: -/-/-
Protocol: ICMP(1)
Inbound interface: GigabitEthernet0/1
State: ICMP_REPLY
Application: OTHER
Start time: 2018-04-23 21:43:47 TTL: 24s
Initiator->Responder: 0 packets 0 bytes
Responder->Initiator: 0 packets 0 bytes
Total sessions found: 2
实验任务三：easy ip配置
//配置Easy ip
[RTA]acl basic2000
[RTA- acl basic-2000]Rule 0 permit source 10.0.0.0 0.0.0.255
[RTA]interface GigabitEthernet 0/1
[RTA- GigabitEthernet 0/1]nat outbound 2000
[H3C]display nat session verbose
Slot 0:
Initiator:
Source IP/port: 10.0.0.2/154
Destination IP/port: 198.76.29.4/2048
DS-Lite tunnel peer: -
VPN instance/VLAN ID/VLL ID: -/-/-
Protocol: ICMP(1)
Inbound interface: GigabitEthernet0/0
Responder:
Source IP/port: 198.76.29.4/6
Destination IP/port: 198.76.28.1/0
DS-Lite tunnel peer: -
VPN instance/VLAN ID/VLL ID: -/-/-
Protocol: ICMP(1)
Inbound interface: GigabitEthernet0/1
State: ICMP_REPLY
Application: OTHER
Start time: 2018-04-25 22:00:39 TTL: 27s
Initiator->Responder: 0 packets 0 bytes
Responder->Initiator: 0 packets 0 bytes
Initiator:
Source IP/port: 10.0.0.1/154
Destination IP/port: 198.76.29.4/2048
DS-Lite tunnel peer: -
VPN instance/VLAN ID/VLL ID: -/-/-
Protocol: ICMP(1)
Inbound interface: GigabitEthernet0/0
Responder:
Source IP/port: 198.76.29.4/5
Destination IP/port: 198.76.28.1/0
DS-Lite tunnel peer: -
VPN instance/VLAN ID/VLL ID: -/-/-
Protocol: ICMP(1)
Inbound interface: GigabitEthernet0/1
State: ICMP_REPLY
Application: OTHER
Start time: 2018-04-25 22:00:36 TTL: 24s
Initiator->Responder: 0 packets 0 bytes
Responder->Initiator: 0 packets 0 bytes
Total sessions found: 2
[H3C]display nat session
Slot 0:
Initiator:
Source IP/port: 10.0.0.2/155
Destination IP/port: 198.76.29.4/2048
DS-Lite tunnel peer: -
VPN instance/VLAN ID/VLL ID: -/-/-
Protocol: ICMP(1)
Inbound interface: GigabitEthernet0/0
Initiator:
Source IP/port: 10.0.0.1/155
Destination IP/port: 198.76.29.4/2048
DS-Lite tunnel peer: -
VPN instance/VLAN ID/VLL ID: -/-/-
Protocol: ICMP(1)
Inbound interface: GigabitEthernet0/0
Total sessions found: 2
实验任务四：NAT SERVER配置
配置NAT server：
[RTA-GigabitEthernet0/1]nat server protocol icmp global 198.76.28.1 inside 10.0
.0.1
//每一个ip地址后面可以加端口号以实现具体的功能，比如说ftp
例子：nat server protocol tcp global 198.76.28.1 ftp inside 10.0.0.1 ftp