SQLdiag-配置文件-PerfmonCollector

前一篇我们已经使用默认配置文件收集了部分诊断数据，并且知道配置文件会影响收集数据的内容。这一篇我们重点讲述配置文件中与性能计数器相关的操作。
可使用XML模板控制SQLdiag使用的收集器。每个收集器可以使用配置文件的<enabled="true">或<enabled="false">来启用或禁用。使用自己最喜欢的文件编辑器，甚至在支持XML文档编辑的Management Studio中修改XML配置文件。不要从XML文件中删除收集器，因为如果XML文件不能匹配，随后SQLdiag将不能加载XSD。
首先让我们使用SD_Detailed.XML配置文件收集5分钟数据：

cd D:Program FilesMicrosoft SQL Server100ToolsBinn
SQLdiag /I F:TroubleShootingSQLdiaginputSD_Detailed.XML /O F:TroubleShootingSQLdiagLocalOutput  /E +00:05:00

生成的文件如下：

SQLDIAG：收集PerfMon数据，对应PerfmonCollector元素
WORK_SQLDIAG_SQL08R2_sp_trace：收集的跟踪数据，对应ProfilerCollector元素
其他文件的说明见上一篇，在我本地收集5分钟性能监视器文件达到19Mb、跟踪数据文件为7Mb(没有做任何其他操作)。

性能计数器数据，与收集计数器数量、轮询时间间隔有关。与收集时长是线性增长关系。
跟踪数据，与添加的跟踪事件，系统繁忙程度有关。收集的大小可能不成比例地膨胀。
建议在高峰时段短暂地运行SQLdiag约10-15分钟，来估计Profiler跟踪事件的生成率和耗费的磁盘空间。这使你能够在数据被改写之前，对将要捕获的活动的时间跨度形成一个粗略的近似。PerfMon文件并不像Profiler跟踪文件一样迅速地增大。Profiler跟踪收集到目前为止是SQLdiag中最消耗资源的数据收集组件。
PerfmonCollector
虽说收集PerfMon数据的开销相比其他数据收集器是最低的，但也不必要将所有性能计数据器都启用。本节将按照下面步骤测试：
1>禁用EventlogCollector、BlockingCollector、ProfilerCollector、CustomDiagnostics元素收集器；PerfmonCollector、SqldiagCollector元素保持启用
2>参照之前配置的数据收集器模板PerfmonLine启用/禁用PerfmonCollector元素下对应的计数器

<?xml version="1.0" encoding="UTF-16"?>
<DataCollectorSet>
    <Status>1</Status>
    <Duration>86100</Duration>
    <Description>
    </Description>
    <DescriptionUnresolved>
    </DescriptionUnresolved>
    <DisplayName>
    </DisplayName>
    <DisplayNameUnresolved>
    </DisplayNameUnresolved>
    <SchedulesEnabled>-1</SchedulesEnabled>
    <LatestOutputLocation>D:PerfmonDataCollector</LatestOutputLocation>
    <Name>PLAYER</Name>
    <OutputLocation>D:PerfmonDataCollector</OutputLocation>
    <RootPath>D:Perfmon</RootPath>
    <Segment>0</Segment>
    <SegmentMaxDuration>0</SegmentMaxDuration>
    <SegmentMaxSize>0</SegmentMaxSize>
    <SerialNumber>15</SerialNumber>
    <Server>
    </Server>
    <Subdirectory>DataCollector</Subdirectory>
    <SubdirectoryFormat>1</SubdirectoryFormat>
    <SubdirectoryFormatPattern>
    </SubdirectoryFormatPattern>
    <Task>
    </Task>
    <TaskRunAsSelf>0</TaskRunAsSelf>
    <TaskArguments>
    </TaskArguments>
    <TaskUserTextArguments>
    </TaskUserTextArguments>
    <UserAccount>SYSTEM</UserAccount>
    <Security>O:BAG:S-1-5-21-2109620463-1702659591-2666464273-513D:AI(A;;FA;;;SY)(A;;FA;;;BA)(A;;FR;;;LU)(A;;0x1301ff;;;S-1-5-80-2661322625-712705077-2999183737-3043590567-590698655)(A;ID;FA;;;SY)(A;ID;FA;;;BA)(A;ID;0x1200ab;;;LU)(A;ID;FR;;;AU)(A;ID;FR;;;LS)(A;ID;FR;;;NS)</Security>
    <StopOnCompletion>0</StopOnCompletion>
    <PerformanceCounterDataCollector>
        <DataCollectorType>0</DataCollectorType>
        <Name>DataCollector</Name>
        <FileName>PLAYER</FileName>
        <FileNameFormat>1</FileNameFormat>
        <FileNameFormatPattern>-yyyyMMdd</FileNameFormatPattern>
        <LogAppend>0</LogAppend>
        <LogCircular>0</LogCircular>
        <LogOverwrite>0</LogOverwrite>
        <LatestOutputLocation>D:PerfmonDataCollectorPLAYER-20151105.blg</LatestOutputLocation>
        <DataSourceName>
        </DataSourceName>
        <SampleInterval>30</SampleInterval>
        <SegmentMaxRecords>0</SegmentMaxRecords>
        <LogFileFormat>3</LogFileFormat>
        <Counter>MemoryAvailable MBytes</Counter>
        <Counter>MemoryCache Bytes</Counter>
        <Counter>MemoryCommit Limit</Counter>
        <Counter>MemoryCommitted Bytes</Counter>
        <Counter>MemoryFree System Page Table Entries</Counter>
        <Counter>MemoryPages Input/sec</Counter>
        <Counter>MemoryPages/sec</Counter>
        <Counter>MemorySystem Cache Resident Bytes</Counter>
        <Counter>MSSQL$PLAYER:Access MethodsFreeSpace Scans/sec</Counter>
        <Counter>MSSQL$PLAYER:Access MethodsFull Scans/sec</Counter>
        <Counter>MSSQL$PLAYER:Access MethodsTable Lock Escalations/sec</Counter>
        <Counter>MSSQL$PLAYER:Access MethodsWorktables Created/sec</Counter>
        <Counter>MSSQL$PLAYER:Access MethodsWorktables From Cache Ratio</Counter>
        <Counter>MSSQL$PLAYER:Buffer ManagerBuffer cache hit ratio</Counter>
        <Counter>MSSQL$PLAYER:Buffer ManagerCheckpoint pages/sec</Counter>
        <Counter>MSSQL$PLAYER:Buffer ManagerDatabase pages</Counter>
        <Counter>MSSQL$PLAYER:Buffer ManagerFree list stalls/sec</Counter>
        <Counter>MSSQL$PLAYER:Buffer ManagerFree pages</Counter>
        <Counter>MSSQL$PLAYER:Buffer ManagerLazy writes/sec</Counter>
        <Counter>MSSQL$PLAYER:Buffer ManagerPage life expectancy</Counter>
        <Counter>MSSQL$PLAYER:Buffer ManagerPage lookups/sec</Counter>
        <Counter>MSSQL$PLAYER:Buffer ManagerPage reads/sec</Counter>
        <Counter>MSSQL$PLAYER:Buffer ManagerPage writes/sec</Counter>
        <Counter>MSSQL$PLAYER:Buffer ManagerReadahead pages/sec</Counter>
        <Counter>MSSQL$PLAYER:Buffer ManagerStolen pages</Counter>
        <Counter>MSSQL$PLAYER:Buffer ManagerTarget pages</Counter>
        <Counter>MSSQL$PLAYER:Buffer ManagerTotal pages</Counter>
        <Counter>MSSQL$PLAYER:Databases(_Total)Transactions/sec</Counter>
        <Counter>MSSQL$PLAYER:General StatisticsConnection Reset/sec</Counter>
        <Counter>MSSQL$PLAYER:General StatisticsLogins/sec</Counter>
        <Counter>MSSQL$PLAYER:General StatisticsLogouts/sec</Counter>
        <Counter>MSSQL$PLAYER:General StatisticsProcesses blocked</Counter>
        <Counter>MSSQL$PLAYER:General StatisticsUser Connections</Counter>
        <Counter>MSSQL$PLAYER:LatchesAverage Latch Wait Time (ms)</Counter>
        <Counter>MSSQL$PLAYER:LatchesLatch Waits/sec</Counter>
        <Counter>MSSQL$PLAYER:LatchesTotal Latch Wait Time (ms)</Counter>
        <Counter>MSSQL$PLAYER:Locks(_Total)Average Wait Time (ms)</Counter>
        <Counter>MSSQL$PLAYER:Locks(_Total)Lock Requests/sec</Counter>
        <Counter>MSSQL$PLAYER:Locks(_Total)Lock Timeouts (timeout &gt; 0)/sec</Counter>
        <Counter>MSSQL$PLAYER:Locks(_Total)Lock Timeouts/sec</Counter>
        <Counter>MSSQL$PLAYER:Locks(_Total)Lock Wait Time (ms)</Counter>
        <Counter>MSSQL$PLAYER:Locks(_Total)Lock Waits/sec</Counter>
        <Counter>MSSQL$PLAYER:Locks(_Total)Number of Deadlocks/sec</Counter>
        <Counter>MSSQL$PLAYER:Memory ManagerGranted Workspace Memory (KB)</Counter>
        <Counter>MSSQL$PLAYER:Memory ManagerMaximum Workspace Memory (KB)</Counter>
        <Counter>MSSQL$PLAYER:Memory ManagerMemory Grants Outstanding</Counter>
        <Counter>MSSQL$PLAYER:Memory ManagerMemory Grants Pending</Counter>
        <Counter>MSSQL$PLAYER:Memory ManagerStolen Server Memory (KB)</Counter>
        <Counter>MSSQL$PLAYER:Memory ManagerTarget Server Memory (KB)</Counter>
        <Counter>MSSQL$PLAYER:Memory ManagerTotal Server Memory (KB)</Counter>
        <Counter>MSSQL$PLAYER:Plan Cache(_Total)Cache Hit Ratio</Counter>
        <Counter>MSSQL$PLAYER:SQL StatisticsAuto-Param Attempts/sec</Counter>
        <Counter>MSSQL$PLAYER:SQL StatisticsBatch Requests/sec</Counter>
        <Counter>MSSQL$PLAYER:SQL StatisticsFailed Auto-Params/sec</Counter>
        <Counter>MSSQL$PLAYER:SQL StatisticsSafe Auto-Params/sec</Counter>
        <Counter>MSSQL$PLAYER:SQL StatisticsSQL Compilations/sec</Counter>
        <Counter>MSSQL$PLAYER:SQL StatisticsSQL Re-Compilations/sec</Counter>
        <Counter>MSSQL$PLAYER:SQL StatisticsUnsafe Auto-Params/sec</Counter>
        <Counter>MSSQL$PLAYER:TransactionsLongest Transaction Running Time</Counter>
        <Counter>Network Interface(*)Bytes Sent/sec</Counter>
        <Counter>Paging File(_Total)\% Usage Peak</Counter>
        <Counter>Paging File(_Total)\% Usage</Counter>
        <Counter>PhysicalDisk(1 D:)\% Idle Time</Counter>
        <Counter>PhysicalDisk(1 D:)Avg. Disk Queue Length</Counter>
        <Counter>PhysicalDisk(1 D:)Avg. Disk sec/Read</Counter>
        <Counter>PhysicalDisk(1 D:)Avg. Disk sec/Transfer</Counter>
        <Counter>PhysicalDisk(1 D:)Avg. Disk sec/Write</Counter>
        <Counter>PhysicalDisk(1 D:)Disk Bytes/sec</Counter>
        <Counter>PhysicalDisk(1 D:)Disk Reads/sec</Counter>
        <Counter>PhysicalDisk(1 D:)Disk Writes/sec</Counter>
        <Counter>Process(sqlservr)\% Processor Time</Counter>
        <Counter>Process(sqlservr)Private Bytes</Counter>
        <Counter>Process(sqlservr)\% User Time</Counter>
        <Counter>Processor(_Total)\% Privileged Time</Counter>
        <Counter>Processor(_Total)\% Processor Time</Counter>
        <Counter>Processor(_Total)\% User Time</Counter>
        <Counter>SystemContext Switches/sec</Counter>
        <Counter>SystemProcessor Queue Length</Counter>
        <CounterDisplayName>MemoryAvailable MBytes</CounterDisplayName>
        <CounterDisplayName>MemoryCache Bytes</CounterDisplayName>
        <CounterDisplayName>MemoryCommit Limit</CounterDisplayName>
        <CounterDisplayName>MemoryCommitted Bytes</CounterDisplayName>
        <CounterDisplayName>MemoryFree System Page Table Entries</CounterDisplayName>
        <CounterDisplayName>MemoryPages Input/sec</CounterDisplayName>
        <CounterDisplayName>MemoryPages/sec</CounterDisplayName>
        <CounterDisplayName>MemorySystem Cache Resident Bytes</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:Access MethodsFreeSpace Scans/sec</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:Access MethodsFull Scans/sec</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:Access MethodsTable Lock Escalations/sec</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:Access MethodsWorktables Created/sec</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:Access MethodsWorktables From Cache Ratio</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:Buffer ManagerBuffer cache hit ratio</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:Buffer ManagerCheckpoint pages/sec</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:Buffer ManagerDatabase pages</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:Buffer ManagerFree list stalls/sec</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:Buffer ManagerFree pages</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:Buffer ManagerLazy writes/sec</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:Buffer ManagerPage life expectancy</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:Buffer ManagerPage lookups/sec</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:Buffer ManagerPage reads/sec</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:Buffer ManagerPage writes/sec</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:Buffer ManagerReadahead pages/sec</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:Buffer ManagerStolen pages</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:Buffer ManagerTarget pages</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:Buffer ManagerTotal pages</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:Databases(_Total)Transactions/sec</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:General StatisticsConnection Reset/sec</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:General StatisticsLogins/sec</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:General StatisticsLogouts/sec</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:General StatisticsProcesses blocked</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:General StatisticsUser Connections</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:LatchesAverage Latch Wait Time (ms)</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:LatchesLatch Waits/sec</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:LatchesTotal Latch Wait Time (ms)</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:Locks(_Total)Average Wait Time (ms)</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:Locks(_Total)Lock Requests/sec</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:Locks(_Total)Lock Timeouts (timeout &gt; 0)/sec</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:Locks(_Total)Lock Timeouts/sec</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:Locks(_Total)Lock Wait Time (ms)</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:Locks(_Total)Lock Waits/sec</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:Locks(_Total)Number of Deadlocks/sec</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:Memory ManagerGranted Workspace Memory (KB)</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:Memory ManagerMaximum Workspace Memory (KB)</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:Memory ManagerMemory Grants Outstanding</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:Memory ManagerMemory Grants Pending</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:Memory ManagerStolen Server Memory (KB)</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:Memory ManagerTarget Server Memory (KB)</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:Memory ManagerTotal Server Memory (KB)</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:Plan Cache(_Total)Cache Hit Ratio</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:SQL StatisticsAuto-Param Attempts/sec</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:SQL StatisticsBatch Requests/sec</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:SQL StatisticsFailed Auto-Params/sec</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:SQL StatisticsSafe Auto-Params/sec</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:SQL StatisticsSQL Compilations/sec</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:SQL StatisticsSQL Re-Compilations/sec</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:SQL StatisticsUnsafe Auto-Params/sec</CounterDisplayName>
        <CounterDisplayName>MSSQL$PLAYER:TransactionsLongest Transaction Running Time</CounterDisplayName>
        <CounterDisplayName>Network Interface(*)Bytes Sent/sec</CounterDisplayName>
        <CounterDisplayName>Paging File(_Total)\% Usage Peak</CounterDisplayName>
        <CounterDisplayName>Paging File(_Total)\% Usage</CounterDisplayName>
        <CounterDisplayName>PhysicalDisk(1 D:)\% Idle Time</CounterDisplayName>
        <CounterDisplayName>PhysicalDisk(1 D:)Avg. Disk Queue Length</CounterDisplayName>
        <CounterDisplayName>PhysicalDisk(1 D:)Avg. Disk sec/Read</CounterDisplayName>
        <CounterDisplayName>PhysicalDisk(1 D:)Avg. Disk sec/Transfer</CounterDisplayName>
        <CounterDisplayName>PhysicalDisk(1 D:)Avg. Disk sec/Write</CounterDisplayName>
        <CounterDisplayName>PhysicalDisk(1 D:)Disk Bytes/sec</CounterDisplayName>
        <CounterDisplayName>PhysicalDisk(1 D:)Disk Reads/sec</CounterDisplayName>
        <CounterDisplayName>PhysicalDisk(1 D:)Disk Writes/sec</CounterDisplayName>
        <CounterDisplayName>Process(sqlservr)\% Processor Time</CounterDisplayName>
        <CounterDisplayName>Process(sqlservr)Private Bytes</CounterDisplayName>
        <CounterDisplayName>Process(sqlservr)\% User Time</CounterDisplayName>
        <CounterDisplayName>Processor(_Total)\% Privileged Time</CounterDisplayName>
        <CounterDisplayName>Processor(_Total)\% Processor Time</CounterDisplayName>
        <CounterDisplayName>Processor(_Total)\% User Time</CounterDisplayName>
        <CounterDisplayName>SystemContext Switches/sec</CounterDisplayName>
        <CounterDisplayName>SystemProcessor Queue Length</CounterDisplayName>
    </PerformanceCounterDataCollector>
    <Schedule>
        <StartDate>5/20/2015</StartDate>
        <EndDate>11/14/2015</EndDate>
        <StartTime>9:30:00 AM</StartTime>
        <Days>127</Days>
    </Schedule>
    <DataManager>
        <Enabled>0</Enabled>
        <CheckBeforeRunning>0</CheckBeforeRunning>
        <MinFreeDisk>0</MinFreeDisk>
        <MaxSize>0</MaxSize>
        <MaxFolderCount>0</MaxFolderCount>
        <ResourcePolicy>0</ResourcePolicy>
        <ReportFileName>report.html</ReportFileName>
        <RuleTargetFileName>report.xml</RuleTargetFileName>
        <EventsFileName>
        </EventsFileName>
    </DataManager>
</DataCollectorSet>
View Code

注意对象下有多实例的情况，比如<PerfmonObject name="Processor(*)" enabled="true">
它会收集Processor对象下指定计数器中所有实例的信息(包含_Total)；在对象上的enabled="false"并不能禁用其下计数器的收集，必须显示在PerfmonCollector元素层或者底层计数器设置enabled="false"
很难一次将所有计数器调整成PerfmonLine模板所配置的，只有修改后让其收集性能计数器，然后查看收集的数据，如此反复几次。修改后收集的数据如下，图形中可能不会呈现出所有收集的计数器，我们可以右击将其他可用的计数器添加到面板。

测试禁用对象<PerfmonObject name="LogicalDisk(*)" enabled="false">，但其下的部分计数器是开启的

我们查看收集到的数据中还是有对应计数器，难道启用/禁用只有在顶层元素设置才会对其下的对象有影响？

结合SQL Nexus完善PerfmonCollector的收集
我们使用sqlnexus导入收集的SQLdiag数据，我们主要查看Perfmon Summary，点击Perfmon Summary出现的页面几乎没数据！

是否还记得我们在RML中有使用Proflier，查看RML所调用的过程/语句。此处我们也利用Proflier监控sqlnexus所调用的过程/语句(跟踪添加筛选器ApplicationName类似于sqlnexus)
我们重新点击Perfmon Summary，在Proflier跟踪下看到如下信息：

查看详细代码可知IO、CPU、Memory是来自下面计数器

<Counter>Process(*)IO Data Bytes/sec</Counter>
<Counter>Process(*)\% Processor Time</Counter>
<Counter>Process(*)Private Bytes</Counter>

而这些计数器刚好没有收集(仅仅收集Process(sqlservr)一个实例)
点击 Click here to view more IO metrics..没有数据：

查看Proflier跟踪下看到如下信息：

查看详细代码可知IO详细信息是来自下面计数器

<Counter>LogicalDisk(*)Avg. Disk sec/Read</Counter>
<Counter>LogicalDisk(*)Avg. Disk sec/Write</Counter>
<Counter>LogicalDisk(*)Disk Bytes/sec</Counter>
<Counter>LogicalDisk(*)Avg. Disk Queue Length</Counter>

点击Click here to view more CPU/Memory metrics..报错

查看Proflier跟踪下看到如下信息：

单独取语句到查询窗口执行，报错“从字符串转换日期和/或时间时，转换失败。”但将CounterDateTime截取再转就可以

点击 Click here to view more Network metrics..没有数据：

查看Proflier跟踪下看到如下信息：

查看详细代码可知NetWork详细信息是来自下面计数器

<Counter>Network Interface(*)Output Queue Length</Counter>
<Counter>Network Interface(*)Packets Received Discarded</Counter>
<Counter>Network Interface(*)Packets Outbound Discarded</Counter>
<Counter>Network Interface(*)Bytes Total/Sec</Counter>

针对上面的问题，解决方案如下：
1>将上面列出的Process(*)、LogicalDisk(*)、Network Interface(*)相关计数器启用
2>使用如下语句更新CounterData中的CounterDateTime字段

USE sqlnexus
GO
UPDATE CounterData SET 
CounterDateTime=LEFT(CounterDateTime,22)

导入数据时有跟踪到创建counterdata的脚本，但没找到原始建表语句保存在哪。另外在sqlnexus应用程序目录的PerfStatsAnalysis.sql文件中有对CounterData表的alter/update语句...
以上问题修正后，再次收集数据用sqlnexus工具查看

Perfmon Summary总界面

IO metrics

CPU metrics

Memory metrics

NetWork metrics
我们可以针对每个图形跟踪其涉及的数据，并最终定位来自哪些计数器。如果已经启用相应的计数器，但是在图形中没有看到，就要查看展现的语句是如何处理的，sqlnexus会对部分数值进行单位换算(类似RML中的Scale)。当前SD_Detailed.XML配置文件的PerfmonCollector元素部分可参考文件链接对应部分。

【推广】 免费学中医，健康全家人
原文地址：https://www.cnblogs.com/Uest/p/5091719.html