CCIE学习笔记 ----GRE over IPsec

GRE over IPsec

这种东西主要可以传nat和各种加密包头的东西

R1:
!
interface Ethernet0/0
 ip address 192.168.12.1 255.255.255.0
 ip ospf 1 area 0
 
 ---------------------------------------------------------------------------------
 
R2:
 
crypto isakmp policy 10
 authentication pre-share
crypto isakmp key cisco address 192.168.34.4   
!
!
crypto ipsec transform-set ccna esp-des esp-md5-hmac
 mode transport
!
!
!
crypto map jiance 1 ipsec-isakmp
 set peer 192.168.34.4
 set transform-set ccna
 match address 100
!
!
!
!
!
interface Tunnel0
 ip address 10.0.0.1 255.255.255.0
 tunnel source Ethernet0/1
 tunnel destination 192.168.34.4
 tunnel key 100
!
interface Ethernet0/0
 ip address 192.168.12.2 255.255.255.0
!
interface Ethernet0/1
 ip address 192.168.23.2 255.255.255.0
 crypto map jiance
!
router ospf 1
 network 192.168.23.2 0.0.0.0 area 0
!
router ospf 2
 network 10.0.0.1 0.0.0.0 area 0
 network 192.168.12.2 0.0.0.0 area 0
!
ip forward-protocol nd
!         
!
ip route 192.168.34.0 255.255.255.0 192.168.23.3
!
!
!
access-list 100 permit ip host 192.168.23.2 host 192.168.34.4
!
 
  ---------------------------------------------------------------------------------
 
 
R3:
!
interface Ethernet0/0
 ip address 192.168.34.3 255.255.255.0
!
interface Ethernet0/1
 ip address 192.168.23.3 255.255.255.0
!
!
router ospf 1
 network 0.0.0.0 255.255.255.255 area 0
!
 
 ---------------------------------------------------------------------------------
 
 
R4:
 
 
crypto isakmp policy 10
 authentication pre-share
crypto isakmp key cisco address 192.168.23.2   
!
!
crypto ipsec transform-set ccna esp-des esp-md5-hmac
 mode transport
!
!
!
crypto map jiance 1 ipsec-isakmp
 set peer 192.168.23.2
 set transform-set ccna
 match address 100
!         
!
!
!
!
interface Tunnel0
 ip address 10.0.0.2 255.255.255.0
 tunnel source Ethernet0/0
 tunnel destination 192.168.23.2
 tunnel key 100
!
interface Ethernet0/0
 ip address 192.168.34.4 255.255.255.0
 crypto map jiance
!
interface Ethernet0/1
 ip address 192.168.45.4 255.255.255.0
!
router ospf 1
 network 192.168.34.4 0.0.0.0 area 0
!
router ospf 2
 network 10.0.0.2 0.0.0.0 area 0
!
!
!
access-list 100 permit ip host 192.168.34.4 host 192.168.23.2
!
 
 ---------------------------------------------------------------------------------
 
 
R5
!
interface Ethernet0/1
 ip address 192.168.45.5 255.255.255.0
 ip ospf 1 area 0
!
 
 ---------------------------------------------------------------------------------
 
实验效果:
 
R1#show ip ospf neighbor
 
Neighbor ID     Pri   State           Dead Time   Address         Interface
192.168.12.2      1   FULL/BDR        00:00:38    192.168.12.2    Ethernet0/0
R1#
 
 --------------------------------------------------------------------------------- 
 
R2#show ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
       a - application route
       + - replicated route, % - next hop override
 
Gateway of last resort is not set
 
      10.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C        10.0.0.0/24 is directly connected, Tunnel0
L        10.0.0.1/32 is directly connected, Tunnel0
      192.168.12.0/24 is variably subnetted, 2 subnets, 2 masks
C        192.168.12.0/24 is directly connected, Ethernet0/0
L        192.168.12.2/32 is directly connected, Ethernet0/0
      192.168.23.0/24 is variably subnetted, 2 subnets, 2 masks
C        192.168.23.0/24 is directly connected, Ethernet0/1
L        192.168.23.2/32 is directly connected, Ethernet0/1
S     192.168.34.0/24 [1/0] via 192.168.23.3
 
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
R2#show ip ospf neighbor
 
Neighbor ID     Pri   State           Dead Time   Address         Interface
192.168.12.1      1   FULL/DR         00:00:39    192.168.12.1    Ethernet0/0
192.168.34.4      0   FULL/  -        00:00:31    10.0.0.2        Tunnel0
192.168.34.3      1   FULL/DR         00:00:31    192.168.23.3    Ethernet0/1
 
 --------------------------------------------------------------------------------- 
 
R4#show ip ospf neighbor 
 
Neighbor ID     Pri   State           Dead Time   Address         Interface
192.168.12.2      0   FULL/  -        00:00:39    10.0.0.1        Tunnel0
192.168.34.3      1   FULL/DR         00:00:34    192.168.34.3    Ethernet0/0
 
  ---------------------------------------------------------------------------------
 
R5#show ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
       a - application route
       + - replicated route, % - next hop override
 
Gateway of last resort is not set
 
      192.168.45.0/24 is variably subnetted, 2 subnets, 2 masks
C        192.168.45.0/24 is directly connected, Ethernet0/1
L        192.168.45.5/32 is directly connected, Ethernet0/1
 
 
 
 
 
 
 
 
 
 
 
原文地址:https://www.cnblogs.com/MnsterLu/p/5743202.html