| Group code | Description |
|
-5 |
APP: persistent reactor chain |
|
-4 |
APP: conditional operator (usedonly withssget) |
|
-3 |
APP: extended data (XDATA) sentinel (fixed) |
|
-2 |
APP: entity name reference (fixed) |
|
-1 |
APP: entity name. The name changes each time a drawing is opened. It is never saved (fixed) |
|
0 |
Text string indicating the entity type (fixed) |
|
1 |
Primary text value for an entity |
|
2 |
Name (attribute tag, block name, and so on) |
|
3-4 |
Other text or name values |
|
5 |
Entity handle; text string of up to 16 hexadecimal digits (fixed) |
|
6 |
Linetype name (fixed) |
|
7 |
Text style name (fixed) |
|
8 |
Layer name (fixed) |
|
9 |
DXF: variable name identifier (used only in HEADER section of the DXF file) |
|
10 |
Primary point; this is the start point of a line or text entity, center of a circle, and so on |
|
11-18 |
Other points |
|
20, 30 |
DXF: Y and Z values of the primary point |
|
21-28, 31-37 |
DXF: Y and Z values of other points |
|
38 |
DXF: entity's elevation if nonzero |
|
39 |
Entity's thickness if nonzero (fixed) |
|
40-48 |
Floating-point values (text height, scale factors, and so on) |
|
48 |
Linetype scale; floating-point scalar value; default value is defined for all entity types |
|
49 |
Repeated floating-point value. Multiple 49 groups may appear in one entity for variable-length tables (such as the dash lengths in the LTYPE table). A 7x group always appears before the first 49 group to specify the table length |
|
50-58 |
Angles (output in degrees to DXF files and radians through AutoLISP and ObjectARX applications) |
|
60 |
Entity visibility; integer value; absence or 0 indicates visibility; 1 indicates invisibility |
|
62 |
Color number (fixed) |
|
66 |
"Entities follow" flag (fixed) |
|
67 |
Space-that is, model or paper space (fixed) |
|
68 |
APP: identifies whether viewport is on but fully off screen; is not active or is off |
|
69 |
APP: viewport identification number |
|
70-78 |
Integer values, such as repeat counts, flag bits, or modes |
|
90-99 |
32-bit integer values |
|
100 |
Subclass data marker (with derived class name as a string). Required for all objects and entity classes that are derived from another concrete class. The subclass data marker segregates data defined
by different classes in the inheritance chain for the same object. |
|
102 |
Control string, followed by "{<arbitrary name>" or "}". Similar to the xdata 1002 group code, except that when the string begins with "{", it can be followed by an arbitrary string whose interpretation is up to the application. The only other control string allowed is "}" as a group terminator. AutoCAD does not interpret these strings except during drawing audit operations. They are for application use |
|
105 |
Object handle for DIMVAR symbol table entry |
|
210 |
Extrusion direction (fixed) |
|
220, 230 |
DXF: Y and Z values of the extrusion direction |
|
280-289 |
8-bit integer values |
|
290-299 |
Boolean flag value |
|
300-309 |
Arbitrary text strings |
|
310-319 |
Arbitrary binary chunks with same representation and limits as 1004 group codes: hexadecimal strings of up to 254 characters represent data chunks of up to 127 bytes |
|
320-329 |
Arbitrary object handles; handle values that are taken "as is." They are not translated during INSERT and XREF operations |
|
330-339 |
Soft-pointer handle; arbitrary soft pointers to other objects within same DXF file or drawing. Translated during INSERT and XREF operations |
|
340-349 |
Hard-pointer handle; arbitrary hard pointers to other objects within same DXF file or drawing. Translated during INSERT and XREF operations |
|
350-359 |
Soft-owner handle; arbitrary soft ownership links to other objects within same DXF file or drawing. Translated during INSERT and XREF operations |
|
360-369 |
Hard-owner handle; arbitrary hard ownership links to other objects within same DXF file or drawing. Translated during INSERT and XREF operations |
|
370-379 |
Lineweight enum value (AcDb::LineWeight). Stored and moved around as a short. Custom non-entity objects may use the full range, but entity classes only use 371-379 DXF group codes in their representation, because AutoCAD and AutoLISP both always assume a 370 group code is the entity's lineweight. This allows 370 to behave like other "common" entity fields. |
|
380-389 |
PlotStyleName type enum (AcDb::PlotStyleNameType). Stored and moved around as a short. Custom non-entity objects may use the full range, but entity classes only use 381-389 DXF group codes in their representation, for the same reason as the Lineweight range above. |
|
390-399 |
String representing handle value of the PlotStyleName object, basically a hard pointer, but has a different range to make backward compatibility easier to deal with. Stored and moved around as an Object ID (a handle in DXF files) and a special type in AutoLISP. Custom non-entity objects may use the full range, but entity classes only use 391-399 DXF group codes in their representation, for the same reason as the Lineweight range above. |
|
400-409 |
16-bit Integers |
|
410-419 |
String |
|
999 |
DXF: The 999 group code indicates that the line following it is a comment string. SAVEAS does not include such groups in a DXF output file, but OPEN honors them and ignores the comments. You can use the 999 group to include comments in a DXF file that you've edited |
|
1000 |
ASCII string (up to 255 bytes long) in extended data |
|
1001 |
Registered application name (ASCII string up to 31 bytes long) for extended data |
|
1002 |
Extended data control string ("{"or "}") |
|
1003 |
Extended data layer name |
|
1004 |
Chunk of bytes (up to 127 bytes long) in extended data |
|
1005 |
Entity handle in extended data; text string of up to 16 hexadecimal digits |
|
1010 |
A point in extended data |
|
1020, 1030 |
DXF: Y andZ values of a point |
|
1011 |
A 3D world space position in extended data |
|
1021, 1031 |
DXF: Y and Z values of a world space position |
|
1012 |
A 3D world space displacement in extended data |
|
1022, 1032 |
DXF: Y and Z values of a world space displacement |
|
1013 |
A 3D world space direction in extended data. |
|
1023, 1033 |
DXF: Y and Z values of a world space direction |
|
1040 |
Extended data floating-point value |
|
1041 |
Extended data distance value |
|
1042 |
Extended data scale factor |
|
1070 |
Extended data 16-bit signed integer |
|
1071 |
Extended data 32-bit signed long |
//z 2012-11-30 14:10:23 IS2120@BG57IV3.T984680163 .K[T22,L461,R15,V668]
Group code value types
| Code range | Group value type |
|
0-9 |
String. (With the introduction of extended symbol names in AutoCAD 2000, the 255 character limit has been lifted. There is no explicit limit to the number of bytes per line, although most lines should fall within 2049 bytes.) |
|
10-59 |
Double precision 3D point |
|
60-79 |
16-bit integer value |
|
90-99 |
32-bit integer value |
|
100 |
String (255-character maximum; less for Unicode strings) |
|
102 |
String (255-character maximum; less for Unicode strings) |
|
105 |
String representing hexadecimal (hex) handle value |
|
140-147 |
Double precision scalar floating-point value |
|
170-175 |
16-bit integer value |
|
280-289 |
8-bit integer value |
|
300-309 |
Arbitrary text string |
|
310-319 |
String representing hex value of binary chunk |
|
320-329 |
String representing hex handle value |
|
330-369 |
String representing hex object IDs |
|
370-379 |
8-bit integer value |
|
380-389 |
8-bit integer value |
|
390-399 |
String representing hex handle value |
|
400-409 |
16-bit integer value |
|
410-419 |
String |
|
999 |
Comment (string) |
|
1000-1009 |
String. (Same limits as indicated with 0-9 code range.) |
|
1010-1059 |
Floating-point value |
|
1060-1070 |
16-bit integer value |
|
1071 |
32-bit integer value |