Docker集中化web界面管理平台-Shipyard部署记录

Docker图形页面管理工具基本常用的有三种: DOCKER UI，Shipyard，Portainer。对比后发现，Shipyard最强大，其次是Portainer,最后是Docker ui。之前介绍了DOcker的web管理工具DockerUI，下面介绍下Docker的另一个web界面管理工具Shipyard的使用。Shipyard（github）是建立在docker集群管理工具Citadel之上的可以管理容器、主机等资源的web图形化工具,包括core和extension两个版本，core即shipyard主要是把多个 Docker host上的 containers 统一管理（支持跨越多个host），extension即shipyard-extensions添加了应用路由和负载均衡、集中化日志、部署等;Shipyard是在Docker Swarm实现对容器、镜像、docker集群、仓库、节点进行管理的web系统。

DockerUI功能：通过Web浏览器的命令行来管理的任务。
DockerUI的优点
1）可以对运行着的容器进行批量操作
2）在容器网络中-会显示容器与容器间的网络关系
3）在Volumes中显示了所有挂载目录

DockerUI一个致命的缺点：不支持多主机.试想一下，如果有N台docker主机时-我就需要一台台的用dockerui进行管理，想想都觉得麻烦。就单台主机而言，dockerui是一款不错的管理工具。

Shipyard功能：是一个集成管理docker容器、镜像、Registries的系统,它可以简化对横跨多个主机的Docker容器集群进行管理. 通过Web用户界面，你可以大致浏览相关信息，比如你的容器在使用多少处理器和内存资源、在运行哪些容器，还可以检查所有集群上的事件日志。
其特性主要包括：
1）支持节点动态集群，可扩展节点的规模（swarm、etcd方案）
2）支持镜像管理、容器管理、节点管理等功能
3）可视化的容器管理和监控管理
4）在线容console终端

Shipyard几个概念
1）engine
一个shipyard管理的docker集群可以包含一个或多个engine（引擎），一个engine就是监听tcp端口的docker daemon。shipyard管理docker daemon、images、containers完全基于Docker API，不需要做其他的修改。另外，shipyard可以对每个engine做资源限制，包括CPU和内存；因为TCP监听相比Unix socket方式会有一定的安全隐患，所以shipyard还支持通过SSL证书与docker后台进程安全通信。
2）rethinkdb
RethinkDB是一个shipyard项目的一个docker镜像，用来存放账号（account）、引擎（engine）、服务密钥（service key）、扩展元数据（extension metadata）等信息，但不会存储任何有关容器或镜像的内容。

Shipyard生态
shipyard是由shipyard控制器以及周围生态系统构成，以下按照deploy启动顺序进行介绍（下面几个就是shipyard使用脚本安装后，启动的几个容器名）
1）RethinkDB
deploy首先启动的就是RethinkDB容器，shipyard采用RethinkDB作为数据库来保存用户等信息
2）Discovery
为了使用Swarm，我们需要一个外部的密钥值存储群容器，shipyard默认是采用了etcd。
3）shipyard_certs
证书管理容器，实现证书验证功能
4）Proxy
默认情况下，Docker引擎只监听Socket，我们可以重新配置引擎使用TLS或者使用一个代理容器，转发请求从TCP到Docker监听的UNIX Socket。
5）Swarm Manager
Swarm管理器
6）Swarm Agent
Swarm代理，运行在每个节点上。
7）Controller
shipyard控制器，Remote API的实现和web的实现。

Centos7.5系统下Shipyard(中文版)部署记录

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
[root@docker-218 ~]# cat /etc/redhat-release
CentOS Linux release 7.5.1804 (Core)
 
[root@docker-218 ~]# ifconfig|grep 172.16.60.218
inet 172.16.60.218 netmask 255.255.255.0 broadcast 172.16.60.255
 
关闭主机防火墙
[root@docker-218 ~]# systemctl disable firewalld.service
[root@docker-218 ~]# systemctl stop firewalld.service
[root@docker-218 ~]# iptables -F
[root@docker-218 ~]# firewall-cmd --state
not running
 
安装docker
[root@docker-218 ~]# yum install docker
 
修改docker配置文件，添加下面一行，进行docker加速设置
[root@node-1 ~]# vim /etc/sysconfig/docker                //在文件底部添加下面一行, (这里就是直接写： xxx.mirror.aliyuncs.com)
ADD_REGISTRY='--add-registry xxx.mirror.aliyuncs.com'
 
启动docker服务
[root@docker-218 ~]# systemctl start docker
 
下载相关镜像(这些镜像如果不提前下载,则在下面一键安装部署时会自动下载,不过要等待一段时间. 所以最好提前下载,一键部署时就很快了)
[root@docker-218 ~]# docker pull rethinkdb
[root@docker-218 ~]# docker pull microbox/etcd
[root@docker-218 ~]# docker pull shipyard/docker-proxy
[root@docker-218 ~]# docker pull swarm
[root@docker-218 ~]# docker pull dockerclub/shipyard
 
下载官方一键部署脚本
https://shipyard-project.com/deploy            这个地址已经失效
最新下载地址: https://pan.baidu.com/s/1ATM32S7tLA35Q-xK7-TgzQ    
提取密码: kgqi
 
接着执行一键部署
替换Controller为中文版
[root@docker-213 ~]# chmod 755 shipyard-deploy
[root@docker-213 ~]# sh shipyard-deploy
Deploying Shipyard
 -> Starting Database
 -> Starting Discovery
 -> Starting Cert Volume
 -> Starting Proxy
 -> Starting Swarm Manager
 -> Starting Swarm Agent
 -> Starting Controller
Waiting for Shipyard on 172.16.60.213:8080
 
Shipyard available at http://172.16.60.213:8080
Username: admin Password: shipyard
 
部署后,可以看到相应的shipyard容器已经创建好了
[root@docker-218 ~]# docker ps
CONTAINER ID        IMAGE                          COMMAND                  CREATED             STATUS              PORTS                                            NAMES
0cc242b4d90b        dockerclub/shipyard:latest     "/bin/controller -..."   19 seconds ago      Up 15 seconds       0.0.0.0:8080->8080/tcp                           shipyard-controller
ce08a7f0f62f        swarm:latest                   "/swarm j --addr 1..."   20 seconds ago      Up 19 seconds       2375/tcp                                         shipyard-swarm-agent
9d2dd2bd5bff        swarm:latest                   "/swarm m --replic..."   20 seconds ago      Up 19 seconds       2375/tcp                                         shipyard-swarm-manager
3435b5e2d13a        shipyard/docker-proxy:latest   "/usr/local/bin/run"     21 seconds ago      Up 20 seconds       0.0.0.0:2375->2375/tcp                           shipyard-proxy
315ca39f00dd        alpine                         "sh"                     21 seconds ago      Up 21 seconds                                                        shipyard-certs
564f25ac8130        microbox/etcd:latest           "/bin/etcd -addr 1..."   22 seconds ago      Up 21 seconds       0.0.0.0:4001->4001/tcp, 0.0.0.0:7001->7001/tcp   shipyard-discovery
bff634944376        rethinkdb                      "rethinkdb --bind all"   22 seconds ago      Up 22 seconds       8080/tcp, 28015/tcp, 29015/tcp                   shipyard-rethinkdb
 
最后访问http://172.16.60.218:8080,使用admin/shipyard用户名和密码登录即可.  (注意:一键部署之后,需要稍等一会儿,8080端口才能起来)
 
===================================================================================
如果想要修改web访问端口,则操作如下:
[root@docker-218 ~]# cat shipyard-deploy |grep 8080
    echo "  PORT: specify the listen port for the controller (default: 8080)"
SHIPYARD_PORT=${PORT:-8080}
 
比如将脚本中默认的8080端口改为80端口
[root@docker-218 ~]# sed -i 's/8080/80/g' shipyard-deploy
 
然后重新部署即可

shipyard的web界面展示如下

删除Shipyard环境操作

1
2
3
4
5
6
7
8
9
10
11
12
13
[root@docker-218 ~]# cat shipyard-deploy |ACTION=remove bash            
Removing Shipyard
 -> Removing Database
 -> Removing Discovery
 -> Removing Cert Volume
 -> Removing Proxy
 -> Removing Swarm Agent
 -> Removing Swarm Manager
 -> Removing Controller
Done
 
[root@docker-218 ~]# docker ps
CONTAINER ID        IMAGE               COMMAND             CREATED             STATUS              PORTS               NAMES

Shipyard添加其他节点主机(centos7.X系统的主机)的操作记录

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
比如将172.16.60.220机器节点加入到上面的shipyard管理中.
 
则需要在被加入节点机器上如下操作:
1) 在被加入的节点上按照上面的最新地址下载shipyard-deploy
2) 执行下面操作 (注意下面etcd地址要写成shipyard部署机的ip地址. 首次执行时会自动下载镜像,需要等待一段时间)
[root@docker-220 ~]# cat shipyard-deploy| ACTION=node DISCOVERY=etcd://172.16.60.218:4001 bash
......
Node added to Swarm: 172.16.60.220
 
[root@docker-220 ~]# docker ps
CONTAINER ID        IMAGE                          COMMAND                  CREATED             STATUS              PORTS                    NAMES
65b7783d7e1e        swarm:latest                   "/swarm j --addr 1..."   12 seconds ago      Up 10 seconds       2375/tcp                 shipyard-swarm-agent
1b50c974b6e7        swarm:latest                   "/swarm m --replic..."   14 seconds ago      Up 12 seconds       2375/tcp                 shipyard-swarm-manager
2514cf31947b        shipyard/docker-proxy:latest   "/usr/local/bin/run"     17 seconds ago      Up 15 seconds       0.0.0.0:2375->2375/tcp   shipyard-proxy
bc9c79df1707        alpine                         "sh"                     19 seconds ago      Up 16 seconds      
 
注意,添加节点时,上面一键脚本需要运行在被添加的节点主机上,而不是shipyard部署节点的机器上.
 
然后登录http://172.16.60.218:8080,在"容器管理"-"主机节点"中看到添加的节点信息了.
 
删除节点机
[root@docker-220 ~]# cat shipyard-deploy |ACTION=remove bash -s
Removing Shipyard
 -> Removing Database
 -> Removing Discovery
 -> Removing Cert Volume
 -> Removing Proxy
 -> Removing Swarm Agent
 -> Removing Swarm Manager
 -> Removing Controller
Done
[root@docker-220 ~]# docker ps
CONTAINER ID        IMAGE               COMMAND             CREATED             STATUS              PORTS               NAMES 

需要注意:如果添加CentOS6.x系统的节要先升级kernel和docker

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
1) 升级内核
[root@docker-6 ~]# cat /etc/redhat-release
CentOS release 6.9 (Final)
 
[root@docker-6 ~]# uname -r
2.6.32-696.el6.x86_64
 
可以参考http://elrepo.org/tiki/tiki-index.php    根据系统版本选择el源
 
先导入公钥
[root@docker-6 ~]# rpm --import https://www.elrepo.org/RPM-GPG-KEY-elrepo.org
[root@docker-6 ~]# rpm -Uvh http://www.elrepo.org/elrepo-release-6-8.el6.elrepo.noarch.rpm
 
升级内核
[root@docker-6 ~]# yum --enablerepo=elrepo-kernel install kernel-lt -y
或者安装
[root@docker-6 ~]# yum --enablerepo=elrepo-kernel install kernel-ml -y
 
修改Grub.conf
[root@docker-6 ~]# vim /etc/grub.conf
.....
default=0                     //将此项的值由1改为0
 
重启系统
[root@docker-6 ~]# init 6
 
重启后再次查看内核,发现已经升级了
[root@docker-6 ~]# uname -r               
4.4.162-1.el6.elrepo.x86_64
 
2) 升级docker (如果之前部署了docker环境的话)
下面的docker二进制文件,百度云盘下载地址: https://pan.baidu.com/s/1AWBbF-CXfXFkIIYs5DTCmA
提取密码: a4r6
[root@docker-6 ~]# wget https://get.docker.com/builds/Linux/x86_64/docker-1.10.3
[root@docker-6 ~]# chmod 755 docker-1.9.1                //这是下载的docker二进制文件
 
停止docker服务
[root@docker-6 ~]# service docker stop
 
替换docker二进制文件
[root@docker-6 ~]# cp /usr/bin/docker /usr/bin/docker_bak
[root@docker-6 ~]# cp docker-1.9.1 /usr/bin/docker
 
启动docker服务
[root@docker-6 ~]# service docker start
 
下载shipyard一键部署脚本
[root@docker-6 ~]# chmod 755 shipyard-deploy
[root@docker-220 ~]# cat shipyard-deploy| ACTION=node DISCOVERY=etcd://172.16.60.218:4001 bash

Nginx做域名转发:  在nginx配置文件http块里添加如下代码:

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
upstream shipyard {
     server 172.16.60.218:8080;
}
server {
    listen          80;
    server_name     kevin.shipyard.com;
  
    location / {
        proxy_pass http://shipyard;
        proxy_http_version 1.1;
        proxy_set_header Upgrade $http_upgrade;
        proxy_set_header Connection "upgrade";
    }
}
 
 
以下三行代码为nginx做WebSockets跳转否则，在执行shell时会报400错误
proxy_http_version 1.1;
proxy_set_header Upgrade $http_upgrade;
proxy_set_header Connection "upgrade";

利用shipyard部署swarm集群及管理容器, 则swarm-manage为shipyard部署机, 其他swarm-node节点则为添加到shipyard管理中的节点.

注：

GitHub地址：https://github.com/shipyard/shipyard-project.com

#!/bin/bash

if [ "$1" != "" ] && [ "$1" = "-h" ]; then
    echo "Shipyard Deploy uses the following environment variables:"
    echo "  ACTION: this is the action to use (deploy, upgrade, node, remove)"
    echo "  DISCOVERY: discovery system used by Swarm (only if using 'node' action)"
    echo "  IMAGE: this overrides the default Shipyard image"
    echo "  PREFIX: prefix for container names"
    echo "  SHIPYARD_ARGS: these are passed to the Shipyard controller container as controller args"
    echo "  TLS_CERT_PATH: path to certs to enable TLS for Shipyard"
    echo "  PORT: specify the listen port for the controller (default: 8080)"
    echo "  IP: specify the address at which the controller or node will be available (default: eth0 ip)"
    echo "  PROXY_PORT: port to run docker proxy (default: 2375)"
    exit 1
fi

if [ -z "`which docker`" ]; then
    echo "You must have the Docker CLI installed on your $PATH"
    echo "  See http://docs.docker.com for details"
    exit 1
fi

ACTION=${ACTION:-deploy}
IMAGE=${IMAGE:-shipyard/shipyard:latest}
PREFIX=${PREFIX:-shipyard}
SHIPYARD_ARGS=${SHIPYARD_ARGS:-""}
TLS_CERT_PATH=${TLS_CERT_PATH:-}
CERT_PATH="/etc/shipyard"
PROXY_PORT=${PROXY_PORT:-2375}
SWARM_PORT=3375
SHIPYARD_PROTOCOL=http
SHIPYARD_PORT=${PORT:-8080}
SHIPYARD_IP=${IP}
DISCOVERY_BACKEND=etcd
DISCOVERY_PORT=4001
DISCOVERY_PEER_PORT=7001
ENABLE_TLS=0
CERT_FINGERPRINT=""
LOCAL_CA_CERT=""
LOCAL_SSL_CERT=""
LOCAL_SSL_KEY=""
LOCAL_SSL_CLIENT_CERT=""
LOCAL_SSL_CLIENT_KEY=""
SSL_CA_CERT=""
SSL_CERT=""
SSL_KEY=""
SSL_CLIENT_CERT=""
SSL_CLIENT_KEY=""

show_cert_help() {
    echo "To use TLS in Shipyard, you must have existing certificates."
    echo "The certs must be named ca.pem, server.pem, server-key.pem, cert.pem and key.pem"
    echo "If you need to generate certificates, see https://github.com/ehazlett/certm for examples."
}

check_certs() {
    if [ -z "$TLS_CERT_PATH" ]; then
        return
    fi

    if [ ! -e $TLS_CERT_PATH ]; then
        echo "Error: unable to find certificates in $TLS_CERT_PATH"
        show_cert_help
        exit 1
    fi

    if [ "$PROXY_PORT" = "2375" ]; then
        PROXY_PORT=2376
    fi
    SWARM_PORT=3376
    SHIPYARD_PROTOCOL=https
    LOCAL_SSL_CA_CERT="$TLS_CERT_PATH/ca.pem"
    LOCAL_SSL_CERT="$TLS_CERT_PATH/server.pem"
    LOCAL_SSL_KEY="$TLS_CERT_PATH/server-key.pem"
    LOCAL_SSL_CLIENT_CERT="$TLS_CERT_PATH/cert.pem"
    LOCAL_SSL_CLIENT_KEY="$TLS_CERT_PATH/key.pem"
    SSL_CA_CERT="$CERT_PATH/ca.pem"
    SSL_CERT="$CERT_PATH/server.pem"
    SSL_KEY="$CERT_PATH/server-key.pem"
    SSL_CLIENT_CERT="$CERT_PATH/cert.pem"
    SSL_CLIENT_KEY="$CERT_PATH/key.pem"
    CERT_FINGERPRINT=$(openssl x509 -noout -in $LOCAL_SSL_CERT -fingerprint -sha256 | awk -F= '{print $2;}')

    if [ ! -e $LOCAL_SSL_CA_CERT ] || [ ! -e $LOCAL_SSL_CERT ] || [ ! -e $LOCAL_SSL_KEY ] || [ ! -e $LOCAL_SSL_CLIENT_CERT ] || [ ! -e $LOCAL_SSL_CLIENT_KEY ]; then
        echo "Error: unable to find certificates"
        show_cert_help
        exit 1
    fi

    ENABLE_TLS=1
}

# container functions
start_certs() {
    ID=$(docker run 
        -ti 
        -d 
        --restart=always 
        --name $PREFIX-certs 
        -v $CERT_PATH 
        alpine 
        sh)
    if [ $ENABLE_TLS = 1 ]; then
        docker cp $LOCAL_SSL_CA_CERT $PREFIX-certs:$SSL_CA_CERT
        docker cp $LOCAL_SSL_CERT $PREFIX-certs:$SSL_CERT
        docker cp $LOCAL_SSL_KEY $PREFIX-certs:$SSL_KEY
        docker cp $LOCAL_SSL_CLIENT_CERT $PREFIX-certs:$SSL_CLIENT_CERT
        docker cp $LOCAL_SSL_CLIENT_KEY $PREFIX-certs:$SSL_CLIENT_KEY
    fi
}

remove_certs() {
    docker rm -fv $PREFIX-certs > /dev/null 2>&1
}

get_ip() {
    if [ -z "$SHIPYARD_IP" ]; then
        SHIPYARD_IP=`docker run --rm --net=host alpine ip route get 8.8.8.8 | awk '{ print $7;  }'`
    fi
}

start_discovery() {
    get_ip

    ID=$(docker run 
        -ti 
        -d 
        -p 4001:4001 
        -p 7001:7001 
        --restart=always 
        --name $PREFIX-discovery 
        microbox/etcd:latest -addr $SHIPYARD_IP:$DISCOVERY_PORT -peer-addr $SHIPYARD_IP:$DISCOVERY_PEER_PORT)
}

remove_discovery() {
    docker rm -fv $PREFIX-discovery > /dev/null 2>&1
}

start_rethinkdb() {
    ID=$(docker run 
        -ti 
        -d 
        --restart=always 
        --name $PREFIX-rethinkdb 
        rethinkdb)
}

remove_rethinkdb() {
    docker rm -fv $PREFIX-rethinkdb > /dev/null 2>&1
}

start_proxy() {
    TLS_OPTS=""
    if [ $ENABLE_TLS = 1 ]; then
        TLS_OPTS="-e SSL_CA=$SSL_CA_CERT -e SSL_CERT=$SSL_CERT -e SSL_KEY=$SSL_KEY -e SSL_SKIP_VERIFY=1"
    fi
    # Note: we add SSL_SKIP_VERIFY=1 to skip verification of the client
    # certificate in the proxy image.  this will pass it to swarm that
    # does verify.  this helps with performance and avoids certificate issues
    # when running through the proxy.  ultimately if the cert is invalid
    # swarm will fail to return.
    ID=$(docker run 
        -ti 
        -d 
        -p $PROXY_PORT:$PROXY_PORT 
        --hostname=$HOSTNAME 
        --restart=always 
        --name $PREFIX-proxy 
        -v /var/run/docker.sock:/var/run/docker.sock 
        -e PORT=$PROXY_PORT 
        --volumes-from=$PREFIX-certs $TLS_OPTS
        shipyard/docker-proxy:latest)
}

remove_proxy() {
    docker rm -fv $PREFIX-proxy > /dev/null 2>&1
}

start_swarm_manager() {
    get_ip

    TLS_OPTS=""
    if [ $ENABLE_TLS = 1 ]; then
        TLS_OPTS="--tlsverify --tlscacert=$SSL_CA_CERT --tlscert=$SSL_CERT --tlskey=$SSL_KEY"
    fi

    EXTRA_RUN_OPTS=""

    if [ -z "$DISCOVERY" ]; then
        DISCOVERY="$DISCOVERY_BACKEND://discovery:$DISCOVERY_PORT"
        EXTRA_RUN_OPTS="--link $PREFIX-discovery:discovery"
    fi
    ID=$(docker run 
        -ti 
        -d 
        --restart=always 
        --name $PREFIX-swarm-manager 
        --volumes-from=$PREFIX-certs $EXTRA_RUN_OPTS 
        swarm:latest 
        m --replication --addr $SHIPYARD_IP:$SWARM_PORT --host tcp://0.0.0.0:$SWARM_PORT $TLS_OPTS $DISCOVERY)
}

remove_swarm_manager() {
    docker rm -fv $PREFIX-swarm-manager > /dev/null 2>&1
}

start_swarm_agent() {
    get_ip

    if [ -z "$DISCOVERY" ]; then
        DISCOVERY="$DISCOVERY_BACKEND://discovery:$DISCOVERY_PORT"
        EXTRA_RUN_OPTS="--link $PREFIX-discovery:discovery"
    fi
    ID=$(docker run 
        -ti 
        -d 
        --restart=always 
        --name $PREFIX-swarm-agent $EXTRA_RUN_OPTS 
        swarm:latest 
        j --addr $SHIPYARD_IP:$PROXY_PORT $DISCOVERY)
}

remove_swarm_agent() {
    docker rm -fv $PREFIX-swarm-agent > /dev/null 2>&1
}

start_controller() {
    #-v $CERT_PATH:/etc/docker:ro 
    TLS_OPTS=""
    if [ $ENABLE_TLS = 1 ]; then
        TLS_OPTS="--tls-ca-cert $SSL_CA_CERT --tls-cert=$SSL_CERT --tls-key=$SSL_KEY --shipyard-tls-ca-cert=$SSL_CA_CERT --shipyard-tls-cert=$SSL_CERT --shipyard-tls-key=$SSL_KEY"
    fi

    ID=$(docker run 
        -ti 
        -d 
        --restart=always 
        --name $PREFIX-controller 
        --link $PREFIX-rethinkdb:rethinkdb 
        --link $PREFIX-swarm-manager:swarm 
        -p $SHIPYARD_PORT:$SHIPYARD_PORT 
        --volumes-from=$PREFIX-certs 
        $IMAGE 
        --debug 
        server 
        --listen :$SHIPYARD_PORT 
        -d tcp://swarm:$SWARM_PORT $TLS_OPTS $SHIPYARD_ARGS)
}

wait_for_available() {
    set +e 
    IP=$1
    PORT=$2
    echo Waiting for Shipyard on $IP:$PORT

    docker pull ehazlett/curl > /dev/null 2>&1

    TLS_OPTS=""
    if [ $ENABLE_TLS = 1 ]; then
        TLS_OPTS="-k"
    fi

    until $(docker run --rm ehazlett/curl --output /dev/null --connect-timeout 1 --silent --head --fail $TLS_OPTS $SHIPYARD_PROTOCOL://$IP:$PORT/ > /dev/null 2>&1); do
        printf '.'
        sleep 1 
    done
    printf '
'
}

remove_controller() {
    docker rm -fv $PREFIX-controller > /dev/null 2>&1
}

if [ "$ACTION" = "deploy" ]; then
    set -e

    check_certs

    get_ip 

    echo "Deploying Shipyard"
    echo " -> Starting Database"
    start_rethinkdb
    echo " -> Starting Discovery"
    start_discovery
    echo " -> Starting Cert Volume"
    start_certs
    echo " -> Starting Proxy"
    start_proxy
    echo " -> Starting Swarm Manager"
    start_swarm_manager
    echo " -> Starting Swarm Agent"
    start_swarm_agent
    echo " -> Starting Controller"
    start_controller

    wait_for_available $SHIPYARD_IP $SHIPYARD_PORT

    echo "Shipyard available at $SHIPYARD_PROTOCOL://$SHIPYARD_IP:$SHIPYARD_PORT"
    if [ $ENABLE_TLS = 1 ] && [ ! -z "$CERT_FINGERPRINT" ]; then
        echo "SSL SHA-256 Fingerprint: $CERT_FINGERPRINT"
    fi
    echo "Username: admin Password: shipyard"

elif [ "$ACTION" = "node" ]; then
    set -e

    if [ -z "$DISCOVERY" ]; then
        echo "You must set the DISCOVERY environment variable"
        echo "with the discovery system used with Swarm"
        exit 1
    fi

    check_certs

    echo "Adding Node"
    echo " -> Starting Cert Volume"
    start_certs
    echo " -> Starting Proxy"
    start_proxy
    echo " -> Starting Swarm Manager"
    start_swarm_manager $DISCOVERY
    echo " -> Starting Swarm Agent"
    start_swarm_agent

    echo "Node added to Swarm: $SHIPYARD_IP"
    
elif [ "$ACTION" = "upgrade" ]; then
    set -e

    check_certs

    get_ip

    echo "Upgrading Shipyard"
    echo " -> Pulling $IMAGE"
    docker pull $IMAGE

    echo " -> Upgrading Controller"
    remove_controller
    start_controller

    wait_for_available $SHIPYARD_IP $SHIPYARD_PORT

    echo "Shipyard controller updated"

elif [ "$ACTION" = "remove" ]; then
    # ignore errors
    set +e

    echo "Removing Shipyard"
    echo " -> Removing Database"
    remove_rethinkdb
    echo " -> Removing Discovery"
    remove_discovery
    echo " -> Removing Cert Volume"
    remove_certs
    echo " -> Removing Proxy"
    remove_proxy
    echo " -> Removing Swarm Agent"
    remove_swarm_agent
    echo " -> Removing Swarm Manager"
    remove_swarm_manager
    echo " -> Removing Controller"
    remove_controller

    echo "Done"
else
    echo "Unknown action $ACTION"
    exit 1
fi

　　

【推广】 免费学中医，健康全家人
原文地址：https://www.cnblogs.com/EikiXu/p/10417301.html