文件操作
1、文件路径： 如 d: '文件名称‘.后缀
2、编码方式： utf-8 gbk ......
3、操作方式： 只读，只写，追加，读写，写读......
以什么编码方式存储的文件，就以什么编码打开进行操作。
具体表现：
只读： r
绝对路径
f = open('e:\a1.py', mode='r', encoding='utf-8') content = f.read() print(content) f.close()
相对路径
f = open('xxx', mode='r', encoding='utf-8') content = f.read() f.close()
注释：绝对路径打开，需要 open（‘文件在硬盘中的地址+后缀’，mode=‘r’，encoding=‘utf-8’），如果路径是 a1 这样简短的文件名，需要另外加一个 不影响正常读取而且分割区分
a 在python中的关键字。
相对路径 只需要文件在同一个目录下，并且文件名称正确，通过正确的格式就能打开。
只读： rb bytes类型 系统内部 传输 存储 使用。
f = open('e:\t1.py', mode='rb') content = f.read() print(content) f.close()
不需要设定编码方式，‘rb’已经内部默认
读写： r+ 只能先读后写，并且不能续写，只能完成一步读写，不能是读写读写读写。
f = open('e:\t2.py', mode='r+', encoding='utf-8') content = f.read() contents = f.write('a11') print(content,contents) f.close()
只写 ： ‘w’ 没有此文件就会创建文件，已经有的，删除原文件，再写入新文件
f = open('e:\t2.py', mode='w', encoding='utf-8') content = f.write('asdadas') print(content) f.close()
写读： w+ 写读 先全部删除，然后写入
f = open('e:\t2.py', mode='w+', encoding='utf-8') f.write('a11') f.seek(0) print(f.read()) f.close()
x， 只写模式【不可读；不存在则创建，存在则报错】
f = open('e:\t6.py', mode='x', encoding='utf-8') f.write('a11aa') f.close()
a， 追加模式【可读； 不存在则创建；存在则只追加内容；】
f = open('e:\t2.py', mode='a', encoding='utf-8') f.write('1qqw') print(f) f.close()
a+， 写读【可读，可写】
f = open('e:\t2.py', mode='a+', encoding='utf-8') f.write('阳展') print(f.read()) f.close()
"b"表示以字节的方式操作
- rb 或 r+b
- wb 或 w+b
- xb 或 w+b
- ab 或 a+b
注：以b方式打开时，读取到的内容是字节类型，写入时也需要提供字节类型
class file(object) def close(self): # real signature unknown; restored from __doc__ 关闭文件 """ close() -> None or (perhaps) an integer. Close the file. Sets data attribute .closed to True. A closed file cannot be used for further I/O operations. close() may be called more than once without error. Some kinds of file objects (for example, opened by popen()) may return an exit status upon closing. """ def fileno(self): # real signature unknown; restored from __doc__ 文件描述符 """ fileno() -> integer "file descriptor". This is needed for lower-level file interfaces, such os.read(). """ return 0 def flush(self): # real signature unknown; restored from __doc__ 刷新文件内部缓冲区 """ flush() -> None. Flush the internal I/O buffer. """ pass def isatty(self): # real signature unknown; restored from __doc__ 判断文件是否是同意tty设备 """ isatty() -> true or false. True if the file is connected to a tty device. """ return False def next(self): # real signature unknown; restored from __doc__ 获取下一行数据，不存在，则报错 """ x.next() -> the next value, or raise StopIteration """ pass def read(self, size=None): # real signature unknown; restored from __doc__ 读取指定字节数据 """ read([size]) -> read at most size bytes, returned as a string. If the size argument is negative or omitted, read until EOF is reached. Notice that when in non-blocking mode, less data than what was requested may be returned, even if no size parameter was given. """ pass def readinto(self): # real signature unknown; restored from __doc__ 读取到缓冲区，不要用，将被遗弃 """ readinto() -> Undocumented. Don't use this; it may go away. """ pass def readline(self, size=None): # real signature unknown; restored from __doc__ 仅读取一行数据 """ readline([size]) -> next line from the file, as a string. Retain newline. A non-negative size argument limits the maximum number of bytes to return (an incomplete line may be returned then). Return an empty string at EOF. """ pass def readlines(self, size=None): # real signature unknown; restored from __doc__ 读取所有数据，并根据换行保存值列表 """ readlines([size]) -> list of strings, each a line from the file. Call readline() repeatedly and return a list of the lines so read. The optional size argument, if given, is an approximate bound on the total number of bytes in the lines returned. """ return [] def seek(self, offset, whence=None): # real signature unknown; restored from __doc__ 指定文件中指针位置 """ seek(offset[, whence]) -> None. Move to new file position. Argument offset is a byte count. Optional argument whence defaults to (offset from start of file, offset should be >= 0); other values are 1 (move relative to current position, positive or negative), and 2 (move relative to end of file, usually negative, although many platforms allow seeking beyond the end of a file). If the file is opened in text mode, only offsets returned by tell() are legal. Use of other offsets causes undefined behavior. Note that not all file objects are seekable. """ pass def tell(self): # real signature unknown; restored from __doc__ 获取当前指针位置 """ tell() -> current file position, an integer (may be a long integer). """ pass def truncate(self, size=None): # real signature unknown; restored from __doc__ 截断数据，仅保留指定之前数据 """ truncate([size]) -> None. Truncate the file to at most size bytes. Size defaults to the current file position, as returned by tell(). """ pass def write(self, p_str): # real signature unknown; restored from __doc__ 写内容 """ write(str) -> None. Write string str to file. Note that due to buffering, flush() or close() may be needed before the file on disk reflects the data written. """ pass def writelines(self, sequence_of_strings): # real signature unknown; restored from __doc__ 将一个字符串列表写入文件 """ writelines(sequence_of_strings) -> None. Write the strings to the file. Note that newlines are not added. The sequence can be any iterable object producing strings. This is equivalent to calling write() for each string. """ pass def xreadlines(self): # real signature unknown; restored from __doc__ 可用于逐行读取文件，非全部 """ xreadlines() -> returns self. For backward compatibility. File objects now include the performance optimizations previously implemented in the xreadlines module. """ pass 2.x
class TextIOWrapper(_TextIOBase): """ Character and line based layer over a BufferedIOBase object, buffer. encoding gives the name of the encoding that the stream will be decoded or encoded with. It defaults to locale.getpreferredencoding(False). errors determines the strictness of encoding and decoding (see help(codecs.Codec) or the documentation for codecs.register) and defaults to "strict". newline controls how line endings are handled. It can be None, '', ' ', ' ', and ' '. It works as follows: * On input, if newline is None, universal newlines mode is enabled. Lines in the input can end in ' ', ' ', or ' ', and these are translated into ' ' before being returned to the caller. If it is '', universal newline mode is enabled, but line endings are returned to the caller untranslated. If it has any of the other legal values, input lines are only terminated by the given string, and the line ending is returned to the caller untranslated. * On output, if newline is None, any ' ' characters written are translated to the system default line separator, os.linesep. If newline is '' or ' ', no translation takes place. If newline is any of the other legal values, any ' ' characters written are translated to the given string. If line_buffering is True, a call to flush is implied when a call to write contains a newline character. """ def close(self, *args, **kwargs): # real signature unknown 关闭文件 pass def fileno(self, *args, **kwargs): # real signature unknown 文件描述符 pass def flush(self, *args, **kwargs): # real signature unknown 刷新文件内部缓冲区 pass def isatty(self, *args, **kwargs): # real signature unknown 判断文件是否是同意tty设备 pass def read(self, *args, **kwargs): # real signature unknown 读取指定字节数据 pass def readable(self, *args, **kwargs): # real signature unknown 是否可读 pass def readline(self, *args, **kwargs): # real signature unknown 仅读取一行数据 pass def seek(self, *args, **kwargs): # real signature unknown 指定文件中指针位置 pass def seekable(self, *args, **kwargs): # real signature unknown 指针是否可操作 pass def tell(self, *args, **kwargs): # real signature unknown 获取指针位置 pass def truncate(self, *args, **kwargs): # real signature unknown 截断数据，仅保留指定之前数据 pass def writable(self, *args, **kwargs): # real signature unknown 是否可写 pass def write(self, *args, **kwargs): # real signature unknown 写内容 pass def __getstate__(self, *args, **kwargs): # real signature unknown pass def __init__(self, *args, **kwargs): # real signature unknown pass @staticmethod # known case of __new__ def __new__(*args, **kwargs): # real signature unknown """ Create and return a new object. See help(type) for accurate signature. """ pass def __next__(self, *args, **kwargs): # real signature unknown """ Implement next(self). """ pass def __repr__(self, *args, **kwargs): # real signature unknown """ Return repr(self). """ pass buffer = property(lambda self: object(), lambda self, v: None, lambda self: None) # default closed = property(lambda self: object(), lambda self, v: None, lambda self: None) # default encoding = property(lambda self: object(), lambda self, v: None, lambda self: None) # default errors = property(lambda self: object(), lambda self, v: None, lambda self: None) # default line_buffering = property(lambda self: object(), lambda self, v: None, lambda self: None) # default name = property(lambda self: object(), lambda self, v: None, lambda self: None) # default newlines = property(lambda self: object(), lambda self, v: None, lambda self: None) # default _CHUNK_SIZE = property(lambda self: object(), lambda self, v: None, lambda self: None) # default _finalizing = property(lambda self: object(), lambda self, v: None, lambda self: None) # default 3.x
注意：
yang123an 123456789 f = open('e:\t2.py', mode='r+', encoding='utf-8') # content = f.read(2) # read(N) 从头开始读取N个字符 ya # print(content) f.seek(2) # 是按照字节定光标的位置开始 content = f.read(3) #读取3个字符 ng1 print(content) f.tell() # 告诉你当前光标的位置 print(f.tell()) # content = f.read() # print(content) # f.tell() # f.readable() # 是否可读 返回True or False # line = f.readline() # 一行一行的读 # line = f.readlines() # 每一行当成列表中的一个元素，添加到list中 # f.truncate(4) #对原文件进行截取一段读取 # for line in f: # print(line) # f.close()
为避免打开文件后忘记关闭，可以通过管理上下文，即：
with open（‘log’，‘r’）as f：
pass
如此方式，当with代码块执行完毕时，内部会自动关闭并释放文件资源。
在Python 2.7 及以后，with又支持同时对多个文件的上下文进行管理。