The following definition of VARIANT is described in OAIDL.H automation header file:
struct tagVARIANT
{
union
{
struct __tagVARIANT
{
VARTYPE vt;
WORD wReserved1;
WORD wReserved2;
WORD wReserved3;
union
{
LONGLONG llval; // VT_I8
LONG lVal; // VT_I4
BYTE bVal; // VT_UI1
SHORT iVal; // VT_I2
FLOAT fltVal; // VT_R4
DOUBLE dblVal; // VT_R8
VARIANT_BOOL boolVal; // VT_BOOL
_VARIANT_BOOL bool;
SCODE scode; // VT_ERROR
CY cyVal; // VT_CY
DATE date; // VT_DATE
BSTR bstrVal; // VT_BSTR
IUnknown * punkVal; // VT_UNKNOWN
IDispatch * pdispVal; // VT_DISPATCH
SAFEARRAY * parray; // VT_ARRAY|*
BYTE * pbVal; // VT_BYREF|VT_UI1
SHORT * piVal; // VT_BYREF|VT_I2
LONG * plVal; // VT_BYREF|VT_I4
LONGLONG * pllVal; // VT_BYREF|VT_I8
FLOAT * pfltVal; // VT_BYREF|VT_R4
DOUBLE * pdblVal; // VT_BYREF|VT_R8
VARIANT_BOOL * pboolVal; // VT_BYREF|VT_BOOL
_VARIANT_BOOL * pbool;
SCODE * pscode; // VT_BYREF|VT_ERROR
CY * pcyVal; // VT_BYREF|VT_CY
DATE * pdate; // VT_BYREF|VT_DATE
BSTR * pbstrVal; // VT_BYREF|VT_BSTR
IUnknown ** ppunkVal; // VT_BYREF|VT_UNKNOWN
IDispatch ** ppdispVal; // VT_BYREF|VT_DISPATCH
SAFEARRAY ** pparray; // VT_BYREF|VT_ARRAY
VARIANT * pvarVal; // VT_BYREF|VT_VARIANT
PVOID * byref; // Generic ByRef
CHAR cVal; // VT_I1
USHORT uiVal; // VT_UI2
ULONG ulVal; // VT_UI4
ULONGLONG ullVal; // VT_UI8
INT intVal; // VT_INT
UINT uintVal; // VT_UINT
DECIMAL * pdecVal; // VT_BYREF|VT_DECIMAL
CHAR * pcVal; // VT_BYREF|VT_I1
USHORT * puiVal; // VT_BYREF|VT_UI2
ULONG * pulVal; // VT_BYREF|VT_UI4
ULONGLONG * pullVal; // VT_BYREF|VT_UI8
INT * pintVal; // VT_BYREF|VT_INT
UINT * puintVal; // VT_BYREF|VT_UINT
struct __tagBRECORD
{
PVOID pvRecord;
IRecordInfo *pRecInfo;
} __VARIANT_NAME_4;
} __VARIANT_NAME_3;
} __VARIANT_NAME_2;
DECIMAL decVal;
} __VARIANT_NAME_1;
};
To simplify extracting values from VARIANTARGs, Automation provides a set of functions for manipulating this type (see Conversion and Manipulation Functions [Automation] and Formatting Routines [Automation]). Use of these functions is strongly recommended to ensure that applications apply consistent coercion rules.
The vt value governs the interpretation of the union as follows:
|
Value |
Description |
|---|---|
|
VT_EMPTY |
No value was specified. If an optional argument to an Automation method is left blank, do not pass a VARIANT of type VT_EMPTY. Instead, pass a VARIANT of type VT_ERROR with a value of DISP_E_PARAMNOTFOUND. |
|
VT_EMPTY | VT_BYREF |
Not valid. |
|
VT_UI1 |
An unsigned 1-byte character is stored in bVal. |
|
VT_UI1 | VT_BYREF |
A reference to an unsigned 1-byte character was passed. A pointer to the value is in pbVal. |
|
VT_UI2 |
An unsigned 2-byte integer value is stored in uiVal. |
|
VT_UI2 | VT_BYREF |
A reference to an unsigned 2-byte integer was passed. A pointer to the value is in puiVal. |
|
VT_UI4 |
An unsigned 4-byte integer value is stored in ulVal. |
|
VT_UI4 | VT_BYREF |
A reference to an unsigned 4-byte integer was passed. A pointer to the value is in pulVal. |
|
VT_UI8 |
An unsigned 8-byte integer value is stored in ullVal. VT_UI8 is not available in Windows Millennium Edition and earlier versions, or Windows 2000 and earlier versions. |
|
VT_UI8 | VT_BYREF |
A reference to an unsigned 8-byte integer was passed. A pointer to the value is in pullVal. |
|
VT_UINT |
An unsigned integer value is stored in uintVal. |
|
VT_UINT | VT_BYREF |
A reference to an unsigned integer value was passed. A pointer to the value is in puintVal. |
|
VT_INT |
An integer value is stored in intVal. |
|
VT_INT | VT_BYREF |
A reference to an integer value was passed. A pointer to the value is in pintVal. |
|
VT_I1 |
A 1-byte character value is stored in cVal. |
|
VT_I1 | VT_BYREF |
A reference to a 1-byte character was passed. A pointer the value is in pcVal. |
|
VT_I2 |
A 2-byte integer value is stored in iVal. |
|
VT_I2 | VT_BYREF |
A reference to a 2-byte integer was passed. A pointer to the value is in piVal. |
|
VT_I4 |
A 4-byte integer value is stored in lVal. |
|
VT_I4 | VT_BYREF |
A reference to a 4-byte integer was passed. A pointer to the value is in plVal. |
|
VT_I8 |
A 8-byte integer value is stored in llVal. VT_I8 is not available in Windows Millennium Edition and earlier versions, or Windows 2000 and earlier versions. |
|
VT_I8 | VT_BYREF |
A reference to a 8-byte integer was passed. A pointer to the value is in pllVal. |
|
VT_R4 |
An IEEE 4-byte real value is stored in fltVal. |
|
VT_R4 | VT_BYREF |
A reference to an IEEE 4-byte real value was passed. A pointer to the value is in pfltVal. |
|
VT_R8 |
An 8-byte IEEE real value is stored in dblVal. |
|
VT_R8 | VT_BYREF |
A reference to an 8-byte IEEE real value was passed. A pointer to its value is in pdblVal. |
|
VT_CY |
A currency value was specified. A currency number is stored as 64-bit (8-byte), two's complement integer, scaled by 10,000 to give a fixed-point number with 15 digits to the left of the decimal point and 4 digits to the right. The value is in cyVal. |
|
VT_CY | VT_BYREF |
A reference to a currency value was passed. A pointer to the value is in pcyVal. |
|
VT_BSTR |
A string was passed; it is stored in bstrVal. This pointer must be obtained and freed by the BSTR functions, which are described in Conversion and Manipulation Functions. |
|
VT_BSTR | VT_BYREF |
A reference to a string was passed. A BSTR* that points to a BSTR is in pbstrVal. The referenced pointer must be obtained or freed by the BSTR functions. |
|
VT_DECIMAL |
Decimal variables are stored as 96-bit (12-byte) unsigned integers scaled by a variable power of 10. VT_DECIMAL uses the entire 16 bytes of the Variant. |
|
VT_DECIMAL | VT_BYREF |
A reference to a decimal value was passed. A pointer to the value is in pdecVal. |
|
VT_NULL |
A propagating null value was specified. (This should not be confused with the null pointer.) The null value is used for tri-state logic, as with SQL. |
|
VT_NULL | VT_BYREF |
Not valid. |
|
VT_ERROR |
An SCODE was specified. The type of the error is specified in scodee. Generally, operations on error values should raise an exception or propagate the error to the return value, as appropriate. |
|
VT_ERROR | VT_BYREF |
A reference to an SCODE was passed. A pointer to the value is in pscode. |
|
VT_BOOL |
A 16 bit Boolean (True/False) value was specified. A value of 0xFFFF (all bits 1) indicates True; a value of 0 (all bits 0) indicates False. No other values are valid. |
|
VT_BOOL | VT_BYREF |
A reference to a Boolean value. A pointer to the Boolean value is in pbool. |
|
VT_DATE |
A value denoting a date and time was specified. Dates are represented as double-precision numbers, where midnight, January 1, 1900 is 2.0, January 2, 1900 is 3.0, and so on. The value is passed in date. This is the same numbering system used by most spreadsheet programs, although some specify incorrectly that February 29, 1900 existed, and thus set January 1, 1900 to 1.0. The date can be converted to and from an MS-DOS representation using VariantTimeToDosDateTime, which is discussed in Conversion and Manipulation Functions. |
|
VT_DATE | VT_BYREF |
A reference to a date was passed. A pointer to the value is in pdate. |
|
VT_DISPATCH |
A pointer to an object was specified. The pointer is in pdispVal. This object is known only to implement IDispatch. The object can be queried as to whether it supports any other desired interface by calling QueryInterface on the object. Objects that do not implement IDispatch should be passed using VT_UNKNOWN. |
|
VT_DISPATCH | VT_BYREF |
A pointer to a pointer to an object was specified. The pointer to the object is stored in the location referred to by ppdispVal. |
|
VT_VARIANT |
Invalid. VARIANTARGs must be passed by reference. |
|
VT_VARIANT | VT_BYREF |
A pointer to another VARIANTARG is passed in pvarVal. This referenced VARIANTARG, pvarVal, cannot be another VT_VARIANT|VT_BYREF. This value can be used to support languages that allow functions to change the types of variables passed by reference. |
|
VT_UNKNOWN |
A pointer to an object that implements the IUnknown interface is passed in punkVal. |
|
VT_UNKNOWN | VT_BYREF |
A pointer to the IUnknown interface is passed in ppunkVal. The pointer to the interface is stored in the location referred to by ppunkVal. |
|
VT_ARRAY | <anything> |
An array of data type <anything> was passed. (VT_EMPTY and VT_NULL are invalid types to combine with VT_ARRAY.) The pointer in parray points to an array descriptor, which describes the dimensions, size, and in-memory location of the array. The array descriptor is never accessed directly, but instead is read and modified using the functions described in Conversion and Manipulation Functions. |