ssh服务介绍

ssh配置文件
/etc/ssh/sshd_config 　　服务端配置文件，#号注释的内容表示默认设置
/etc/ssh/ssh_config 　　客户端配置文件，#号注释的内容表示默认设置
~/.ssh/known_hosts 　　已知主机信息，对应用户家目录中
/root/.ssh/id_rsa 　　　　私钥文件
/root/.ssh/id_rsa.pub 　　公钥文件
~/.ssh/authorized_keys 来自其他主机的公钥信息

ssh客户端（linux）

[root@nfs01 ~]$ rpm -ql openssh-clients 
/etc/ssh/ssh_config
/usr/bin/scp　　　 　 #远程拷贝文件，加密传输
/usr/bin/sftp 　　　　#ftp服务，加密传输
/usr/bin/slogin
/usr/bin/ssh 　　　　 #远程连接
/usr/bin/ssh-add
/usr/bin/ssh-agent
/usr/bin/ssh-copy-id #拷贝密钥中的公钥文件
/usr/bin/ssh-keyscan

ssh ssh协议连接命令

-p 指定端口

ssh -p 10022 172.24.184.31 　　　　#登录主机172.24.184.31，该主机ssh协议端口为10022

scp 安全、远程复制

-P（大写）指定ssh服务端口
-r 　　　　递归复制，用于复制目录
-p 　　　保持文件属性
-l 　　　　限制传输速度

scp -P 10022 -rp /data  root@172.16.1.7:/tmp

sftp 安全ftp，缺点是不能锁定用户家目录

-o 　　　　使用ssh服务协议参数
-oPort　　指定sftp访问端口，即ssh服务端口
-P（大写）作用同上，指定sftp访问端口，即ssh服务端口

sftp -P 10022 172.24.184.31
sftp -oPort=10022 172.24.184.31

put 上传文件

sftp> put dd.txt /tmp 　　　　　　　　　　#将当前目录中dd.txt上传到远程主机/tmp目录中
Uploading dd.txt to /tmp/dd.txt
dd.txt 100% 242 32.6KB/s 00:00

get 下载文件

sftp> get /tmp/rsync_fail_log.sh 　　　　#将远程主机/tmp/rsync_fail_log.sh下载到本机/opt/目录中
Fetching /tmp/rsync_fail_log.sh to /opt/rsync_fail_log.sh

ls 查看远程服务器工作目录内容，即sftp登录后工作目录
lls 查看本地主机工作目录内容，local list

pwd 查看远程服务器工作目录，即sftp登录后工作目录
lpwd 查看本地主机工作目录，loacl pwd

！command
在本地主机执行命令

sftp> !hostname
m01

ssh服务配置优化：

[root@56test ~]# cat /etc/ssh/sshd_config
#	$OpenBSD: sshd_config,v 1.100 2016/08/15 12:32:04 naddy Exp $

# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.

# This sshd was compiled with PATH=/usr/local/bin:/usr/bin

# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented. Uncommented options override the
# default value.

# If you want to change the port on a SELinux system, you have to tell 
# SELinux about this change.
# semanage port -a -t ssh_port_t -p tcp #PORTNUMBER　　　　　　　　 #端口修改的selinux
#
Port 22 #ssh协议端口
port 10022
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress :: #ssh协议监听IP

HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_dsa_key
HostKey /etc/ssh/ssh_host_ecdsa_key
HostKey /etc/ssh/ssh_host_ed25519_key

# Ciphers and keying
#RekeyLimit default none

# Logging
#SyslogFacility AUTH
SyslogFacility AUTHPRIV
#LogLevel INFO

# Authentication:

#LoginGraceTime 2m
#PermitRootLogin yes 　　　　　　　　#允许root远程登录
#StrictModes yes
#MaxAuthTries 6
#MaxSessions 10

#PubkeyAuthentication yes

# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
# but this is overridden so installations will only check .ssh/authorized_keys
AuthorizedKeysFile	.ssh/authorized_keys

#AuthorizedPrincipalsFile none

#AuthorizedKeysCommand none
#AuthorizedKeysCommandUser nobody

# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes

# To disable tunneled clear text passwords, change to no here!
#PasswordAuthentication yes
#PermitEmptyPasswords no 　　　　　　　　　　　　#允许空密码
PasswordAuthentication yes

# Change to no to disable s/key passwords
#ChallengeResponseAuthentication yes
ChallengeResponseAuthentication no

# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no
#KerberosUseKuserok yes

# GSSAPI options
GSSAPIAuthentication yes
GSSAPICleanupCredentials no
#GSSAPIStrictAcceptorCheck yes
#GSSAPIKeyExchange no
#GSSAPIEnablek5users no

# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the ChallengeResponseAuthentication and
# PasswordAuthentication. Depending on your PAM configuration,
# PAM authentication via ChallengeResponseAuthentication may bypass
# the setting of "PermitRootLogin without-password".
# If you just want the PAM account and session checks to run without
# PAM authentication, then enable this but set PasswordAuthentication
# and ChallengeResponseAuthentication to 'no'.
# WARNING: 'UsePAM no' is not supported in Red Hat Enterprise Linux and may cause several
# problems.
UsePAM yes

#AllowAgentForwarding yes
#AllowTcpForwarding yes
#GatewayPorts no
X11Forwarding yes
#X11DisplayOffset 10
#X11UseLocalhost yes
#PermitTTY yes
#PrintMotd yes
#PrintLastLog yes
#TCPKeepAlive yes
#UseLogin no
#UsePrivilegeSeparation sandbox
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
#ShowPatchLevel no
#UseDNS yes
#PidFile /var/run/sshd.pid
#MaxStartups 10:30:100
#PermitTunnel no
#ChrootDirectory none
#VersionAddendum none

# no default banner path
#Banner none

# Accept locale-related environment variables
AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
AcceptEnv LC_IDENTIFICATION LC_ALL LANGUAGE
AcceptEnv XMODIFIERS

# override default of no subsystems
Subsystem	sftp	/usr/libexec/openssh/sftp-server

# Example of overriding settings on a per-user basis
#Match User anoncvs
#	X11Forwarding no
#	AllowTcpForwarding no
#	PermitTTY no
#	ForceCommand cvs server

生成秘钥ssh-keygen

[root@m01 ~]# ssh-keygen 　　　　　　　　　　　　　　　　　　　　　　　　　  　#生成秘钥文件
Generating public/private rsa key pair.
Enter file in which to save the key (/root/.ssh/id_rsa):　　　　　　    #生成秘钥文件名，默认/root/.ssh/id_rsa
Enter passphrase (empty for no passphrase): 　　　　　　　　　　　　　 　  #秘钥文件的密码
Enter same passphrase again: 
Your identification has been saved in /root/.ssh/id_rsa. 　　　　　　　　#私钥文件/root/.ssh/id_rsa
Your public key has been saved in /root/.ssh/id_rsa.pub. 　　　　　　　　#公钥文件/root/.ssh/id_rsa.pub
The key fingerprint is:
SHA256:QvNT/abrd6CiCY3iRCva4eVIqyixF9XHtTfL1LS1E14 root@m01
The key's randomart image is:
+---[RSA 2048]----+
| |
| .. ..E|
| .o. ....o.o+|
| ...oo.. +.o+ |
| .. ..S + oo .|
|. .. . + . oo. |
| o+.= o . .. . |
|+=.X . . .. ... .|
|=o= o o. oo. . |
+----[SHA256]-----+

　公钥文件分发 ssh-copy-id

[root@m01 ~]# ssh-copy-id -p 10022 -i ~/.ssh/id_rsa.pub 172.24.184.7　　　　　　　　 #将公钥/root/.ssh/id_rsa.pub分发远程服务器的/root/.ssh/authorized_keys，-i指定公钥文件

/usr/bin/ssh-copy-id: INFO: Source of key(s) to be installed: "/root/.ssh/id_rsa.pub"
The authenticity of host '[172.24.184.7]:10022 ([172.24.184.7]:10022)' can't be established.
ECDSA key fingerprint is SHA256:mMM4HsJ75/XqhqgN3rJMrRXburh6FZ1ps33RV4cxrus.
ECDSA key fingerprint is MD5:b1:8e:69:5c:70:0e:3d:3f:69:d7:44:7b:67:98:fe:27.
Are you sure you want to continue connecting (yes/no)? yes
/usr/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that are already installed
/usr/bin/ssh-copy-id: INFO: 1 key(s) remain to be installed -- if you are prompted now it is to install the new keys
root@172.24.184.7's password:

Number of key(s) added: 1

Now try logging into the machine, with: "ssh -p '10022' '172.24.184.7'"
and check to make sure that only the key(s) you wanted were added.

非交互式创建、分发秘钥对：

ssh-keygen 密钥对创建工具

-P 　　密码
-f 　　输出的秘钥文件
-q 　　不输出信息
-t 　　指定秘钥类型,通常默认rsa

ssh-keygen -f ~/.ssh/id_rsa -P '' -q 　　　　#为当前用户生成 无密码的~/.ssh/id_rsa秘钥文件，不输出提示信息

ssh-copy-id 公钥分发

-f 　　force mode 强制，不检查远程主机是否已安装本机公钥
-i　　指定秘钥文件
-o 　　<ssh -o options>指定ssh参数选项，StrictHostKeyChecking=no 表示不检查hostkey，即远程连接时不检查远程主机指纹信息　　　　

ssh-copy-id -f -i ~/.ssh/id_rsa.pub -o StrictHostKeyChecking=no 172.16.1.8

sshpass 非交互方式ssh密码验证工具

sshpass -p123456 ssh-copy-id -f -i ~/.ssh/id_rsa.pub "-o StrictHostKeyChecking=no" 172.16.1.7

ssh-keygen -f ~/.ssh/id_rsa -P '' -q
ssh-copy-id -f -i ~/.ssh/id_rsa.pub "-o StrictHostKeyChecking=no" 172.16.1.7
sshpass -p123456 ssh-copy-id -f -i ~/.ssh/id_rsa.pub "-o StrictHostKeyChecking=no" 172.16.1.7

君子务本，本立而道生

ssh服务介绍

scp 安全、远程复制

sftp 安全ftp，缺点是不能锁定用户家目录

ssh服务配置优化：

推荐优化选项

生成秘钥ssh-keygen

公钥文件分发 ssh-copy-id

非交互式创建、分发秘钥对：

ssh-keygen 密钥对创建工具

ssh-copy-id 公钥分发

sshpass 非交互方式ssh密码验证工具

　公钥文件分发 ssh-copy-id