压缩工具gzip、bzip2、xz的使用

本文使用

  • 为了要压缩
  • 常见压缩格式
  • 压缩工具
    • gzip压缩工具
    • bz2压缩工具
    • xz压缩工具

为什么要压缩

为什么要压缩?文件经过压缩后,其大小会缩小,可以节约服务器带宽资源、内存资源,节约运维成本!

常见压缩格式

Linux平台的常见压缩文件格式有以下几种

  • .zip
  • .gz
  • .bz2
  • .xz
  • .tar.gz
  • .tar.bz2
  • .tar.xz

虽然在Linux中文件后缀并不重要,但是为了便于区分和管理,压缩文件还是最好加上上述的一些后缀名。

压缩工具

gzip压缩工具

gzip不能压缩目录!!

  • 基本使用:压缩/解压缩
# 创建一个大文件
[root@localhost tmp]# find /etc/ -type f -exec cat {} >> 1.txt ;
[root@localhost tmp]# ls -lh 
总用量 25M
-rw-r--r--. 1 root root 25M 11月  3 18:53 1.txt

#压缩文件:gzip file
[root@localhost tmp]# gzip 1.txt 
[root@localhost tmp]# ls -lh
总用量 9.3M
-rw-r--r--. 1 root root 9.3M 11月  3 18:53 1.txt.gz


#解压缩文件: gzip -d file.gz
# gzip -d 等价于 gunzip
[root@localhost tmp]# gzip -d 1.txt.gz 
[root@localhost tmp]# ls -lh
总用量 25M
-rw-r--r--. 1 root root 25M 11月  3 18:53 1.txt
  • 按指定压缩级别进行压缩
#以1级别进行压缩,默认压缩级别为9;
# 压缩级别1-9,压缩级别越高,占用CPU资源越高
# gzip -[1-9] file
[root@localhost tmp]# gzip -1 1.txt 
[root@localhost tmp]# ls -lh
总用量 9.9M
-rw-r--r--. 1 root root 9.9M 11月  3 18:53 1.txt.gz
  • 在压缩的同时,保留原文件(默认不保留)
[root@localhost tmp]# gzip -c 1.txt > /test/tmp/1.txt.gz
[root@localhost tmp]# ls -lh
总用量 34M
-rw-r--r--. 1 root root  25M 11月  3 18:53 1.txt
-rw-r--r--. 1 root root 9.3M 11月  3 19:04 1.txt.gz

  • -c配合-d使用,将压缩文件解压缩的同时保留压缩包
# 注意最好使用绝对路径表示文件,清楚明白,当然相对路径表示也可以。
[[root@localhost tmp]# gzip -d -c /test/tmp/1.txt.gz > /test/tmp/2.txt

[root@localhost tmp]# ls -l
总用量 34684
-rw-r--r--. 1 root root  9649736 11月  3 19:04 1.txt.gz
-rw-r--r--. 1 root root 25865478 11月  3 19:22 2.txt
  • zcat命令在不打开压缩包的情况下查看包内文件的内容
# 由于内容太多,这里只显示行数
[root@localhost tmp]# zcat 1.txt.gz | wc -l
176350

可以使用file命令查看压缩文件的具体信息!

[root@localhost tmp]# file 1.txt.gz 
1.txt.gz: gzip compressed data, was "1.txt", from Unix, last modified: Fri Nov  3 18:53:55 2017, max speed

有些压缩文件被命名为不带压缩文件类型后缀的,这种文件无法解压,可以使用file来查看文件类型,然后修改后缀,更好区分!!

[root@centos7 test]# mv 1.txt.bz2 1.txt
[root@centos7 test]# file 1.txt 
1.txt: bzip2 compressed data, block size = 900k
[root@centos7 test]# mv 1.txt 1.txt.bz2

bz2压缩工具

压缩率比gzip更高

未安装使用yum install -y bzip2

常用使用跟gzip命令类似,且同样不支持压缩目录

  • 基本用法
# 压缩前
[root@localhost tmp]# ls -lh
总用量 25M
-rw-r--r--. 1 root root 25M 11月  3 19:22 1.txt

# bzip2压缩
[root@localhost tmp]# bzip2 1.txt 
# 压缩后,比gzip压缩率高
[root@localhost tmp]# ls -lh
总用量 8.2M
-rw-r--r--. 1 root root 8.1M 11月  3 19:22 1.txt.bz2
# file命令查看文件格式
[root@localhost tmp]# file 1.txt.bz2 
1.txt.bz2: bzip2 compressed data, block size = 900k


# bzip2解压缩
[root@localhost tmp]# bzip2 -d 1.txt.bz2 
[root@localhost tmp]# ls -lh
总用量 25M
-rw-r--r--. 1 root root 25M 11月  3 19:22 1.txt

  • -c参数在压缩同时保留原文件
[root@localhost tmp]# bzip2 -c 1.txt > 1.txt.bz2
[root@localhost tmp]# ls -lh
总用量 33M
-rw-r--r--. 1 root root  25M 11月  3 19:22 1.txt
-rw-r--r--. 1 root root 8.1M 11月  3 20:04 1.txt.bz2
  • -d -c参数:在解压同时保留原压缩文件
[root@localhost tmp]# bzip2 -d -c 1.txt.bz2 > 3.txt
[root@localhost tmp]# ls -l
总用量 58816
-rw-r--r--. 1 root root 25865478 11月  3 19:22 1.txt
-rw-r--r--. 1 root root  8491810 11月  3 20:04 1.txt.bz2
-rw-r--r--. 1 root root 25865478 11月  3 20:06 3.txt
  • 指定压缩级压缩(一般保存默认即可)
bzip2同样可以指定压缩级别:1-9,默认级别为6
[root@localhost tmp]# bzip2 -1 1.txt 
[root@localhost tmp]# ls -lh
总用量 8.8M
-rw-r--r--. 1 root root 8.8M 11月  3 19:22 1.txt.bz2
  • 不解压情况下查看压缩文件内文件的内容
[root@localhost tmp]# bzcat 1.txt.bz2 | wc -l
176350

xz压缩工具

级别使用方法等同与上述的gzip和bzip2命令,同样也不能压缩目录!!

一般情况下,上述3种压缩方式:xz > bz2 > gzip

具体压缩要看文件内容,也不一定xz的压缩包最小

  • 基本使用
# 压缩
[root@localhost tmp]# xz 1.txt 
[root@localhost tmp]# ls -lh
总用量 7.0M
-rw-r--r--. 1 root root 7.0M 11月  3 19:22 1.txt.xz

# 解压缩 xz -d等价于unxz
[root@localhost tmp]# xz -d 1.txt.xz 
[root@localhost tmp]# ls -lh
总用量 25M
-rw-r--r--. 1 root root 25M 11月  3 19:22 1.txt

  • 压缩文件同时保留原文件
[root@localhost tmp]# xz -c 1.txt > 1.txt.xz
[root@localhost tmp]# ls -lh
总用量 32M
-rw-r--r--. 1 root root  25M 11月  3 19:22 1.txt
-rw-r--r--. 1 root root 7.0M 11月  3 21:02 1.txt.xz
  • 解压同时保留压缩文件
[root@localhost tmp]# xz -d -c 1.txt.xz > ./2.txt
[root@localhost tmp]# ls -lh
总用量 57M
-rw-r--r--. 1 root root  25M 11月  3 19:22 1.txt
-rw-r--r--. 1 root root 7.0M 11月  3 21:02 1.txt.xz
-rw-r--r--. 1 root root  25M 11月  3 21:02 2.txt
  • 查看压缩文件内的文件内容(不解压前提下)
[root@localhost tmp]# xzcat 1.txt.xz | wc -l
176350
  • xz同样支持指导压缩级别的压缩
[root@localhost tmp]# xz -1 2.txt 
[root@localhost tmp]# ls -lh
总用量 40M
-rw-r--r--. 1 root root  25M 11月  3 19:22 1.txt
-rw-r--r--. 1 root root 7.0M 11月  3 21:02 1.txt.xz
-rw-r--r--. 1 root root 7.5M 11月  3 21:02 2.txt.xz


转载于:https://my.oschina.net/LuCastiel/blog/1560663

原文地址:https://www.cnblogs.com/twodog/p/12139029.html